{"analyzer_versions":{"semgrep":"1.163.0"},"body":{"audit_stages":[{"blockers":[],"completed_at":"2026-10-03T19:53:54.206Z","description":"Normalize the submitted contract target and confirm it can enter the Solidity audit lane.","elapsed_ms":320,"id":"intake","label":"Audit intake","limitations":[],"next_step":"Acquire verified source or scan the pasted Solidity source.","order":1,"status":"passed"},{"blockers":[],"completed_at":"2026-10-03T19:53:54.206Z","description":"Resolve pasted source or verified explorer source without treating malformed input as demo data.","elapsed_ms":1450,"id":"source_acquisition","label":"Source acquisition","limitations":[],"next_step":"Validate the analyzer toolchain against the acquired source.","order":2,"status":"passed"},{"blockers":[],"completed_at":"2026-10-03T19:53:54.206Z","description":"Confirm the configured static analyzers can run and produce parseable output.","elapsed_ms":2300,"id":"toolchain_validation","label":"Toolchain validation","limitations":[],"next_step":"Run static analysis and capture raw detector evidence.","order":3,"status":"passed"},{"blockers":[],"completed_at":"2026-10-03T19:53:54.206Z","description":"Run static analyzers against the sandboxed source and collect raw detector evidence.","elapsed_ms":8800,"findings_count":2,"id":"static_analysis","label":"Static analysis","limitations":[],"next_step":"Normalize detector output into one deduped finding set.","order":4,"status":"passed"},{"blockers":[],"completed_at":"2026-10-03T19:53:54.206Z","description":"Dedupe detectors, classify vulnerability classes and compute severity-weighted risk.","elapsed_ms":1150,"findings_count":2,"id":"finding_normalization","label":"Finding normalization","limitations":[],"next_step":"Review exploitability conservatively against confidence and limitations.","order":5,"status":"passed"},{"blockers":[],"completed_at":"2026-10-03T19:53:54.206Z","description":"Frame automated findings with conservative exploitability and limitation notes.","elapsed_ms":1900,"findings_count":2,"id":"exploitability_review","label":"Exploitability review","limitations":["Automated exploitability review is conservative and does not replace a manual exploitability assessment."],"next_step":"Draft remediation notes from the normalized evidence.","order":6,"status":"partial"},{"blockers":[],"completed_at":"2026-10-03T19:53:54.206Z","description":"Prepare remediation-oriented evidence for the shareable report artifact.","elapsed_ms":1500,"findings_count":2,"id":"remediation_draft","label":"Remediation draft","limitations":["Remediation notes are generated from detector evidence and require project-specific engineering review."],"next_step":"Attach an operator review artifact before claiming human review.","order":7,"status":"partial"},{"blockers":["No operator review artifact is attached to this automated scan."],"completed_at":"2026-10-03T19:53:54.206Z","description":"Record whether a human operator artifact exists before buyer escalation.","elapsed_ms":0,"id":"operator_review","label":"Operator review","limitations":["Human operator review has not been attached to this automated scan yet."],"next_step":"Attach a real operator review artifact before claiming human review.","order":8,"status":"blocked"},{"artifact":{"created_at":"2026-10-03T19:53:54.206Z","id":"solidity-2f746d702f766567","label":"Automated Solidity report","type":"report"},"blockers":[],"completed_at":"2026-10-03T19:53:54.206Z","description":"Publish the automated report artifact or explain why the scan failed closed.","elapsed_ms":620,"findings_count":2,"id":"finalization","label":"Finalization","limitations":["Final report is an automated static-analysis artifact; no operator review artifact is attached."],"next_step":"Share the report with explicit limitations and review state.","order":9,"status":"partial"}],"counts":{"access-control":0,"centralization":0,"flash-loan":0,"front-running":0,"gas-dos":1,"logic":1,"math-overflow":0,"oracle-manipulation":0,"other":0,"reentrancy":0,"timestamp-dependence":0,"unchecked-call":0,"uninitialized":0},"executive_summary":["2 findings surfaced (0 critical, 1 high, 0 medium, 0 low, 1 informational).","HIGH · DosGas (gas-dos-dos-address.sol#9-36) contract sets array length with a user-controlled value: (DosGas) — exploitability medium.","Automated static analysis only. A human operator review has not been attached to this report."],"findings":[{"class":"gas-dos","component":"DosGas","confidence":"medium","description":"DosGas (gas-dos-dos-address.sol#9-36) contract sets array length with a user-controlled value:\n\t- creditorAddresses.push(msg.sender) (gas-dos-dos-address.sol#24)\n","end_line":36,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"gas-dos-dos-address.sol","id":"b5a4efb5e3e501a2446bac8e2f7d88e855d8105d5fbc519a683d11a6e69b228e","line":9,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#controlled-array-length"],"remediation":"Cap loop bounds, paginate iteration, and ensure no user can grow a state structure the contract must traverse to make progress.","rule_id":"slither:controlled-array-length","severity":"high","source":"slither","title":"DosGas (gas-dos-dos-address.sol#9-36) contract sets array length with a user-controlled value:"},{"class":"logic","component":"^0.4.25","confidence":"high","description":"Version constraint ^0.4.25 contains known severe issues (https://solidity.readthedocs.io/en/latest/bugs.html)\n\t- DirtyBytesArrayToStorage\n\t- ABIDecodeTwoDimensionalArrayMemory\n\t- KeccakCaching\n\t- EmptyByteArrayCopy\n\t- DynamicArrayCleanup\n\t- ImplicitConstructorCallvalueCheck\n\t- TupleAssignmentMultiStackSlotComponents\n\t- MemoryArrayCreationOverflow\n\t- privateCanBeOverridden\n\t- SignedArrayStorageCopy\n\t- ABIEncoderV2StorageArrayWithMultiSlotElement\n\t- DynamicConstructorArgumentsClippedABIV2\n\t- UninitializedFunctionPointerInConstructor_0.4.x\n\t- IncorrectEventSignatureInLibraries_0.4.x\n\t- ABIEncoderV2PackedStorage_0.4.x.\nIt is used by:\n\t- ^0.4.25 (gas-dos-dos-address.sol#7)\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"gas-dos-dos-address.sol","id":"af49d842e3d3bc9322c866f7e3261cfa58a5651afb5b1788c2904ccab3da78f8","line":7,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#solc-version"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:solc-version","severity":"informational","source":"slither","title":"Version constraint ^0.4.25 contains known severe issues (https://solidity.readthedocs.io/en/latest/bugs.html)"}],"limitations":["VegaSec runs static analysis only. Findings can include false positives, miss patterns the configured detectors do not cover, and never replace manual auditor judgement.","Scan ran slither and semgrep against a single sandboxed copy of the source. Multi-file dependency analysis beyond what slither resolves automatically is out of scope.","This report is not a certification, audit attestation, or financial advice."],"warnings":[]},"canonical_version":"vss-canonical-1","coverage_status":"complete","final_score":90,"findings_count":2,"generated_at":"2026-10-03T19:53:54.206Z","id":"VSS-20261003-4Q7TDSZJ","severity_counts":{"critical":0,"high":1,"informational":1,"low":0,"medium":0},"source_filename":"gas-dos-dos-address.sol","source_hash":"4f6960a84c3da5f791faf0111033b1d6a425e2575fb03b31acd248210497794e","surface":"solidity","warnings_count":0}