{"analyzer_versions":{"semgrep":"1.163.0"},"body":{"audit_stages":[{"blockers":[],"completed_at":"2026-10-03T19:53:17.787Z","description":"Normalize the submitted contract target and confirm it can enter the Solidity audit lane.","elapsed_ms":320,"id":"intake","label":"Audit intake","limitations":[],"next_step":"Acquire verified source or scan the pasted Solidity source.","order":1,"status":"passed"},{"blockers":[],"completed_at":"2026-10-03T19:53:17.787Z","description":"Resolve pasted source or verified explorer source without treating malformed input as demo data.","elapsed_ms":1450,"id":"source_acquisition","label":"Source acquisition","limitations":[],"next_step":"Validate the analyzer toolchain against the acquired source.","order":2,"status":"passed"},{"blockers":[],"completed_at":"2026-10-03T19:53:17.787Z","description":"Confirm the configured static analyzers can run and produce parseable output.","elapsed_ms":2300,"id":"toolchain_validation","label":"Toolchain validation","limitations":["One or more analyzers emitted warnings; report findings remain usable but should be read with limitations."],"next_step":"Run static analysis and capture raw detector evidence.","order":3,"status":"partial"},{"blockers":[],"completed_at":"2026-10-03T19:53:17.787Z","description":"Run static analyzers against the sandboxed source and collect raw detector evidence.","elapsed_ms":8800,"findings_count":31,"id":"static_analysis","label":"Static analysis","limitations":["One or more analyzers emitted warnings; report findings remain usable but should be read with limitations."],"next_step":"Normalize detector output into one deduped finding set.","order":4,"status":"partial"},{"blockers":[],"completed_at":"2026-10-03T19:53:17.787Z","description":"Dedupe detectors, classify vulnerability classes and compute severity-weighted risk.","elapsed_ms":1150,"findings_count":31,"id":"finding_normalization","label":"Finding normalization","limitations":[],"next_step":"Review exploitability conservatively against confidence and limitations.","order":5,"status":"passed"},{"blockers":[],"completed_at":"2026-10-03T19:53:17.787Z","description":"Frame automated findings with conservative exploitability and limitation notes.","elapsed_ms":1900,"findings_count":31,"id":"exploitability_review","label":"Exploitability review","limitations":["Automated exploitability review is conservative and does not replace a manual exploitability assessment."],"next_step":"Draft remediation notes from the normalized evidence.","order":6,"status":"partial"},{"blockers":[],"completed_at":"2026-10-03T19:53:17.787Z","description":"Prepare remediation-oriented evidence for the shareable report artifact.","elapsed_ms":1500,"findings_count":31,"id":"remediation_draft","label":"Remediation draft","limitations":["Remediation notes are generated from detector evidence and require project-specific engineering review."],"next_step":"Attach an operator review artifact before claiming human review.","order":7,"status":"partial"},{"blockers":["No operator review artifact is attached to this automated scan."],"completed_at":"2026-10-03T19:53:17.787Z","description":"Record whether a human operator artifact exists before buyer escalation.","elapsed_ms":0,"id":"operator_review","label":"Operator review","limitations":["Human operator review has not been attached to this automated scan yet."],"next_step":"Attach a real operator review artifact before claiming human review.","order":8,"status":"blocked"},{"artifact":{"created_at":"2026-10-03T19:53:17.787Z","id":"solidity-2f746d702f766567","label":"Automated Solidity report","type":"report"},"blockers":[],"completed_at":"2026-10-03T19:53:17.787Z","description":"Publish the automated report artifact or explain why the scan failed closed.","elapsed_ms":620,"findings_count":31,"id":"finalization","label":"Finalization","limitations":["Final report is an automated static-analysis artifact; no operator review artifact is attached."],"next_step":"Share the report with explicit limitations and review state.","order":9,"status":"partial"}],"counts":{"access-control":2,"centralization":0,"flash-loan":0,"front-running":0,"gas-dos":2,"logic":13,"math-overflow":1,"oracle-manipulation":0,"other":5,"reentrancy":4,"timestamp-dependence":0,"unchecked-call":4,"uninitialized":0},"executive_summary":["31 findings surfaced (0 critical, 1 high, 5 medium, 8 low, 17 informational).","HIGH · Rubixi (access-control-rubixi.sol#10-162) contract sets array length with a user-controlled value: (Rubixi) — exploitability medium.","Automated static analysis only. A human operator review has not been attached to this report."],"findings":[{"class":"gas-dos","component":"Rubixi","confidence":"medium","description":"Rubixi (access-control-rubixi.sol#10-162) contract sets array length with a user-controlled value:\n\t- participants.push(Participant(msg.sender,(msg.value * pyramidMultiplier) / 100)) (access-control-rubixi.sol#61)\n","end_line":162,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"8515b6eb078b58d166a2f19e47982c700683ceb756ef2f4a54570bde074de5c8","line":10,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#controlled-array-length"],"remediation":"Cap loop bounds, paginate iteration, and ensure no user can grow a state structure the contract must traverse to make progress.","rule_id":"slither:controlled-array-length","severity":"high","source":"slither","title":"Rubixi (access-control-rubixi.sol#10-162) contract sets array length with a user-controlled value:"},{"class":"unchecked-call","component":"addPayout","confidence":"medium","description":"Rubixi.addPayout(uint256) (access-control-rubixi.sol#59-79) ignores return value by participants[payoutOrder].etherAddress.send(payoutToSend) (access-control-rubixi.sol#74)\n","end_line":79,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"e6037aa8fdd3f4dd6bb8bd8e5ecfdc9755d9cbd23c08dadfd9657adfd3cfc3c9","line":59,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unchecked-send"],"remediation":"Check the boolean return of low-level call/delegatecall/send and revert on failure with a descriptive reason string.","rule_id":"slither:unchecked-send","severity":"medium","source":"slither","title":"Rubixi.addPayout(uint256) (access-control-rubixi.sol#59-79) ignores return value by participants[payoutOrder].etherAddress.send(payoutToSend) (access-control-ru"},{"class":"unchecked-call","component":"collectAllFees","confidence":"medium","description":"Rubixi.collectAllFees() (access-control-rubixi.sol#82-87) ignores return value by creator.send(collectedFees) (access-control-rubixi.sol#85)\n","end_line":87,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"6c606926f33b91fda15de836f5782c8b33f33a5c8a1feeca59db0d6abb70261b","line":82,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unchecked-send"],"remediation":"Check the boolean return of low-level call/delegatecall/send and revert on failure with a descriptive reason string.","rule_id":"slither:unchecked-send","severity":"medium","source":"slither","title":"Rubixi.collectAllFees() (access-control-rubixi.sol#82-87) ignores return value by creator.send(collectedFees) (access-control-rubixi.sol#85)"},{"class":"unchecked-call","component":"collectFeesInEther","confidence":"medium","description":"Rubixi.collectFeesInEther(uint256) (access-control-rubixi.sol#89-97) ignores return value by creator.send(_amt) (access-control-rubixi.sol#95)\n","end_line":97,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"aad9d61bd879d9fecc8e791f9d628f001c11d2a70eae42a48b3b7d7a2580da6a","line":89,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unchecked-send"],"remediation":"Check the boolean return of low-level call/delegatecall/send and revert on failure with a descriptive reason string.","rule_id":"slither:unchecked-send","severity":"medium","source":"slither","title":"Rubixi.collectFeesInEther(uint256) (access-control-rubixi.sol#89-97) ignores return value by creator.send(_amt) (access-control-rubixi.sol#95)"},{"class":"math-overflow","component":"collectPercentOfFees","confidence":"medium","description":"Rubixi.collectPercentOfFees(uint256) (access-control-rubixi.sol#99-105) performs a multiplication on the result of a division:\n\t- feesToCollect = collectedFees / 100 * _pcent (access-control-rubixi.sol#102)\n","end_line":105,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"f334fb297ca2bd7931c10c78bae68cac8a7fedeafa311723ffa8ec1d6bb0f835","line":99,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#divide-before-multiply"],"remediation":"Confirm the solc version uses checked arithmetic (>=0.8) or wrap mutations in OpenZeppelin SafeMath. Avoid unchecked blocks unless explicitly justified.","rule_id":"slither:divide-before-multiply","severity":"medium","source":"slither","title":"Rubixi.collectPercentOfFees(uint256) (access-control-rubixi.sol#99-105) performs a multiplication on the result of a division:"},{"class":"unchecked-call","component":"collectPercentOfFees","confidence":"medium","description":"Rubixi.collectPercentOfFees(uint256) (access-control-rubixi.sol#99-105) ignores return value by creator.send(feesToCollect) (access-control-rubixi.sol#103)\n","end_line":105,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"1e67d297ca4569544173684981ecef7eb2918e4bf5bd8035ce8235676883866b","line":99,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unchecked-send"],"remediation":"Check the boolean return of low-level call/delegatecall/send and revert on failure with a descriptive reason string.","rule_id":"slither:unchecked-send","severity":"medium","source":"slither","title":"Rubixi.collectPercentOfFees(uint256) (access-control-rubixi.sol#99-105) ignores return value by creator.send(feesToCollect) (access-control-rubixi.sol#103)"},{"class":"access-control","component":"onlyowner","confidence":"high","description":"Modifier Rubixi.onlyowner() (access-control-rubixi.sol#27-29) does not always execute _; or revert\n","end_line":29,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"access-control-rubixi.sol","id":"e39de3616b4ebae63f80ee331abf6f2f216f02314cc8450e25645df6eb5e2f53","line":27,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-modifier"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:incorrect-modifier","severity":"low","source":"slither","title":"Modifier Rubixi.onlyowner() (access-control-rubixi.sol#27-29) does not always execute _; or revert"},{"class":"gas-dos","component":"addPayout","confidence":"medium","description":"Rubixi.addPayout(uint256) (access-control-rubixi.sol#59-79) has external calls inside a loop: participants[payoutOrder].etherAddress.send(payoutToSend) (access-control-rubixi.sol#74)\n\tCalls stack containing the loop:\n\t\tRubixi.fallback()\n\t\tRubixi.init()\n","end_line":79,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"0b613699f3d046a53e88f749070e768620136ddf6069a7dca04ec579248bf42b","line":59,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#calls-loop"],"remediation":"Cap loop bounds, paginate iteration, and ensure no user can grow a state structure the contract must traverse to make progress.","rule_id":"slither:calls-loop","severity":"low","source":"slither","title":"Rubixi.addPayout(uint256) (access-control-rubixi.sol#59-79) has external calls inside a loop: participants[payoutOrder].etherAddress.send(payoutToSend) (access-"},{"class":"other","component":"collectFeesInEther","confidence":"medium","description":"Rubixi.collectFeesInEther(uint256) (access-control-rubixi.sol#89-97) should emit an event for: \n\t- collectedFees -= _amt (access-control-rubixi.sol#96) \n","end_line":97,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"60e06ecc585f9934e02523b985552ef2e673a869fc3474b43e73881b2536b4d8","line":89,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#events-maths"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:events-maths","severity":"low","source":"slither","title":"Rubixi.collectFeesInEther(uint256) (access-control-rubixi.sol#89-97) should emit an event for:"},{"class":"other","component":"collectPercentOfFees","confidence":"medium","description":"Rubixi.collectPercentOfFees(uint256) (access-control-rubixi.sol#99-105) should emit an event for: \n\t- collectedFees -= feesToCollect (access-control-rubixi.sol#104) \n","end_line":105,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"a8660157c64a860fe7afce5c438948c86ead46e8d4c0ab9526ae02fc4214c86d","line":99,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#events-maths"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:events-maths","severity":"low","source":"slither","title":"Rubixi.collectPercentOfFees(uint256) (access-control-rubixi.sol#99-105) should emit an event for:"},{"class":"other","component":"changeOwner","confidence":"medium","description":"Rubixi.changeOwner(address) (access-control-rubixi.sol#108-110) should emit an event for: \n\t- creator = _owner (access-control-rubixi.sol#109) \n","end_line":110,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"75dcd1bdd244bbf186524a66dc35cc5684ef63d2ac86cd644ab30abd7261471e","line":108,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#events-access"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:events-access","severity":"low","source":"slither","title":"Rubixi.changeOwner(address) (access-control-rubixi.sol#108-110) should emit an event for:"},{"class":"access-control","component":"_owner","confidence":"medium","description":"Rubixi.changeOwner(address)._owner (access-control-rubixi.sol#108) lacks a zero-check on :\n\t\t- creator = _owner (access-control-rubixi.sol#109)\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"5fbf1cd02239c30a9d124d73653548a3322d163f69a9339af834ceefa8e5b9cf","line":108,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#missing-zero-check"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:missing-zero-check","severity":"low","source":"slither","title":"Rubixi.changeOwner(address)._owner (access-control-rubixi.sol#108) lacks a zero-check on :"},{"class":"other","component":"changeMultiplier","confidence":"medium","description":"Rubixi.changeMultiplier(uint256) (access-control-rubixi.sol#112-116) should emit an event for: \n\t- pyramidMultiplier = _mult (access-control-rubixi.sol#115) \n","end_line":116,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"53d9853436dc5ca3ec906cd8562de4370967407472e7896961a976c1d1514b67","line":112,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#events-maths"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:events-maths","severity":"low","source":"slither","title":"Rubixi.changeMultiplier(uint256) (access-control-rubixi.sol#112-116) should emit an event for:"},{"class":"other","component":"changeFeePercentage","confidence":"medium","description":"Rubixi.changeFeePercentage(uint256) (access-control-rubixi.sol#118-122) should emit an event for: \n\t- feePercent = _fee (access-control-rubixi.sol#121) \n","end_line":122,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"access-control-rubixi.sol","id":"d9a3020324f07cae527e53aa15252a9427191df4e2156976e11beeedf45a1931","line":118,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#events-maths"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:events-maths","severity":"low","source":"slither","title":"Rubixi.changeFeePercentage(uint256) (access-control-rubixi.sol#118-122) should emit an event for:"},{"class":"logic","component":"^0.4.15","confidence":"high","description":"Version constraint ^0.4.15 contains known severe issues (https://solidity.readthedocs.io/en/latest/bugs.html)\n\t- DirtyBytesArrayToStorage\n\t- KeccakCaching\n\t- EmptyByteArrayCopy\n\t- DynamicArrayCleanup\n\t- ImplicitConstructorCallvalueCheck\n\t- TupleAssignmentMultiStackSlotComponents\n\t- MemoryArrayCreationOverflow\n\t- privateCanBeOverridden\n\t- SignedArrayStorageCopy\n\t- UninitializedFunctionPointerInConstructor_0.4.x\n\t- IncorrectEventSignatureInLibraries_0.4.x\n\t- ExpExponentCleanup\n\t- NestedArrayFunctionCallDecoder\n\t- ZeroFunctionSelector.\nIt is used by:\n\t- ^0.4.15 (access-control-rubixi.sol#8)\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"5457e94b0235e3f96064b18371da58ff0abc1f41704ee1b50ddb37e3e7a200e2","line":8,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#solc-version"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:solc-version","severity":"informational","source":"slither","title":"Version constraint ^0.4.15 contains known severe issues (https://solidity.readthedocs.io/en/latest/bugs.html)"},{"class":"logic","component":"DynamicPyramid","confidence":"high","description":"Function Rubixi.DynamicPyramid() (access-control-rubixi.sol#23-25) is not in mixedCase\n","end_line":25,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"870ee97b542a7e11403c95ea648a6760d91946ab04dd7fe8be3b062d0c914f48","line":23,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Rubixi.DynamicPyramid() (access-control-rubixi.sol#23-25) is not in mixedCase"},{"class":"logic","component":"_fee","confidence":"high","description":"Parameter Rubixi.addPayout(uint256)._fee (access-control-rubixi.sol#59) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"4adcf144bc34ed16f8ae22227b51051c8a6160280d2a40fea070de2a19c62923","line":59,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Parameter Rubixi.addPayout(uint256)._fee (access-control-rubixi.sol#59) is not in mixedCase"},{"class":"reentrancy","component":"addPayout","confidence":"medium","description":"Reentrancy in Rubixi.addPayout(uint256) (access-control-rubixi.sol#59-79):\n\tExternal calls:\n\t- participants[payoutOrder].etherAddress.send(payoutToSend) (access-control-rubixi.sol#74)\n\tState variables written after the call(s):\n\t- balance -= participants[payoutOrder].payout (access-control-rubixi.sol#76)\n\t- payoutOrder += 1 (access-control-rubixi.sol#77)\n","end_line":79,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"5f89f096c6eb158b85e7179051237e2a67356b3321e3a356b6e74c69f123e5dc","line":59,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-unlimited-gas"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-unlimited-gas","severity":"informational","source":"slither","title":"Reentrancy in Rubixi.addPayout(uint256) (access-control-rubixi.sol#59-79):"},{"class":"reentrancy","component":"collectAllFees","confidence":"medium","description":"Reentrancy in Rubixi.collectAllFees() (access-control-rubixi.sol#82-87):\n\tExternal calls:\n\t- creator.send(collectedFees) (access-control-rubixi.sol#85)\n\tState variables written after the call(s):\n\t- collectedFees = 0 (access-control-rubixi.sol#86)\n","end_line":87,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"ea6bc7752b73b42016f7e78d26d87679dff1d7647052463415a1f289916e4748","line":82,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-unlimited-gas"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-unlimited-gas","severity":"informational","source":"slither","title":"Reentrancy in Rubixi.collectAllFees() (access-control-rubixi.sol#82-87):"},{"class":"logic","confidence":"high","description":"Deprecated standard detected THROW (access-control-rubixi.sol#83):\n\t- Usage of \"throw\" should be replaced with \"revert()\"\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"e75864f5f33fa9b39444e39f061d8e713e1c1b8048332fbb80e5a1c2f7b8bed8","line":83,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#deprecated-standards"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:deprecated-standards","severity":"informational","source":"slither","title":"Deprecated standard detected THROW (access-control-rubixi.sol#83):"},{"class":"logic","component":"_amt","confidence":"high","description":"Parameter Rubixi.collectFeesInEther(uint256)._amt (access-control-rubixi.sol#89) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"10fe4c1adfdec4dd8bfe56bd3f8064a05e3eb94b909a1119e89decf24933927e","line":89,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Parameter Rubixi.collectFeesInEther(uint256)._amt (access-control-rubixi.sol#89) is not in mixedCase"},{"class":"reentrancy","component":"collectFeesInEther","confidence":"medium","description":"Reentrancy in Rubixi.collectFeesInEther(uint256) (access-control-rubixi.sol#89-97):\n\tExternal calls:\n\t- collectAllFees() (access-control-rubixi.sol#91)\n\t\t- creator.send(collectedFees) (access-control-rubixi.sol#85)\n\t- creator.send(_amt) (access-control-rubixi.sol#95)\n\tState variables written after the call(s):\n\t- collectedFees -= _amt (access-control-rubixi.sol#96)\n","end_line":97,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"b387f15bfb005885c0e6fa69eeb32e920c2f6b79308a0c6607a8babcc0b500cb","line":89,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-unlimited-gas"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-unlimited-gas","severity":"informational","source":"slither","title":"Reentrancy in Rubixi.collectFeesInEther(uint256) (access-control-rubixi.sol#89-97):"},{"class":"logic","confidence":"high","description":"Deprecated standard detected THROW (access-control-rubixi.sol#93):\n\t- Usage of \"throw\" should be replaced with \"revert()\"\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"f17d09f9e9a1cde611f8c0c75ecda65723f6ff9abe212e5b04e9518a2bc58d6e","line":93,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#deprecated-standards"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:deprecated-standards","severity":"informational","source":"slither","title":"Deprecated standard detected THROW (access-control-rubixi.sol#93):"},{"class":"logic","component":"_pcent","confidence":"high","description":"Parameter Rubixi.collectPercentOfFees(uint256)._pcent (access-control-rubixi.sol#99) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"75a4b6c524e6c2fb661b75a509c96dad3476e82fc7c84f911b22ad996f0a5d04","line":99,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Parameter Rubixi.collectPercentOfFees(uint256)._pcent (access-control-rubixi.sol#99) is not in mixedCase"},{"class":"reentrancy","component":"collectPercentOfFees","confidence":"medium","description":"Reentrancy in Rubixi.collectPercentOfFees(uint256) (access-control-rubixi.sol#99-105):\n\tExternal calls:\n\t- creator.send(feesToCollect) (access-control-rubixi.sol#103)\n\tState variables written after the call(s):\n\t- collectedFees -= feesToCollect (access-control-rubixi.sol#104)\n","end_line":105,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"c32090bdef22a77fcf598aa0c4597acc273f1f44aeb56c9df8f5919b2018bc96","line":99,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-unlimited-gas"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-unlimited-gas","severity":"informational","source":"slither","title":"Reentrancy in Rubixi.collectPercentOfFees(uint256) (access-control-rubixi.sol#99-105):"},{"class":"logic","confidence":"high","description":"Deprecated standard detected THROW (access-control-rubixi.sol#100):\n\t- Usage of \"throw\" should be replaced with \"revert()\"\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"064ef751ffb13922276eaef19c67e294497dac5d8bdd23d81bcb75e39ac9254a","line":100,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#deprecated-standards"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:deprecated-standards","severity":"informational","source":"slither","title":"Deprecated standard detected THROW (access-control-rubixi.sol#100):"},{"class":"logic","component":"_owner","confidence":"high","description":"Parameter Rubixi.changeOwner(address)._owner (access-control-rubixi.sol#108) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"69466ac84fa104bf947e842425be715ebeee5f608ac084505c880f693e09cd18","line":108,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Parameter Rubixi.changeOwner(address)._owner (access-control-rubixi.sol#108) is not in mixedCase"},{"class":"logic","component":"_mult","confidence":"high","description":"Parameter Rubixi.changeMultiplier(uint256)._mult (access-control-rubixi.sol#112) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"3da6e395b9759074c488a1acd9cf595ae42ea0313e2afbd5ae8379d3cc4cb85f","line":112,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Parameter Rubixi.changeMultiplier(uint256)._mult (access-control-rubixi.sol#112) is not in mixedCase"},{"class":"logic","confidence":"high","description":"Deprecated standard detected THROW (access-control-rubixi.sol#113):\n\t- Usage of \"throw\" should be replaced with \"revert()\"\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"4c0b865a093340d3ec117a0c1c33e746617597b46f2177d29806fa41e28cf772","line":113,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#deprecated-standards"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:deprecated-standards","severity":"informational","source":"slither","title":"Deprecated standard detected THROW (access-control-rubixi.sol#113):"},{"class":"logic","component":"_fee","confidence":"high","description":"Parameter Rubixi.changeFeePercentage(uint256)._fee (access-control-rubixi.sol#118) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"d3d0079519ca8aaf4e04c014e9584260e4bc495e07f7332c63fa16bd9fdfa110","line":118,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Parameter Rubixi.changeFeePercentage(uint256)._fee (access-control-rubixi.sol#118) is not in mixedCase"},{"class":"logic","confidence":"high","description":"Deprecated standard detected THROW (access-control-rubixi.sol#119):\n\t- Usage of \"throw\" should be replaced with \"revert()\"\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"access-control-rubixi.sol","id":"4fbe836c91b5c7277d56c750d9294960961ea4f7e6d24e3b6c3d664665ef9a76","line":119,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#deprecated-standards"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:deprecated-standards","severity":"informational","source":"slither","title":"Deprecated standard detected THROW (access-control-rubixi.sol#119):"}],"limitations":["VegaSec runs static analysis only. Findings can include false positives, miss patterns the configured detectors do not cover, and never replace manual auditor judgement.","Scan ran slither and semgrep against a single sandboxed copy of the source. Multi-file dependency analysis beyond what slither resolves automatically is out of scope.","Some detectors emitted warnings (see `warnings`); their output was still ingested but should be read with extra care.","This report is not a certification, audit attestation, or financial advice."],"warnings":["Unmapped detector slither:events-access — classified as 'other'","Unmapped detector slither:events-maths — classified as 'other'"]},"canonical_version":"vss-canonical-1","coverage_status":"complete","final_score":49,"findings_count":31,"generated_at":"2026-10-03T19:53:17.787Z","id":"VSS-20261003-PM6I0SIP","severity_counts":{"critical":0,"high":1,"informational":17,"low":8,"medium":5},"source_filename":"access-control-rubixi.sol","source_hash":"a4c33aa1b035feff8e114e5afab6a15e524636d4ea4660459d3b5909272eabed","surface":"solidity","warnings_count":2}