{"analyzer_versions":{"semgrep":"1.163.0","solc":"0.5.17"},"body":{"audit_stages":[{"blockers":[],"completed_at":"2026-10-04T00:36:48.799Z","description":"Normalize the submitted contract target and confirm it can enter the Solidity audit lane.","elapsed_ms":320,"id":"intake","label":"Audit intake","limitations":[],"next_step":"Acquire verified source or scan the pasted Solidity source.","order":1,"status":"passed"},{"blockers":[],"completed_at":"2026-10-04T00:36:48.799Z","description":"Resolve pasted source or verified explorer source without treating malformed input as demo data.","elapsed_ms":1450,"id":"source_acquisition","label":"Source acquisition","limitations":[],"next_step":"Validate the analyzer toolchain against the acquired source.","order":2,"status":"passed"},{"blockers":[],"completed_at":"2026-10-04T00:36:48.799Z","description":"Confirm the configured static analyzers can run and produce parseable output.","elapsed_ms":2300,"id":"toolchain_validation","label":"Toolchain validation","limitations":["One or more analyzers emitted warnings; report findings remain usable but should be read with limitations."],"next_step":"Run static analysis and capture raw detector evidence.","order":3,"status":"partial"},{"blockers":[],"completed_at":"2026-10-04T00:36:48.799Z","description":"Run static analyzers against the sandboxed source and collect raw detector evidence.","elapsed_ms":8800,"findings_count":138,"id":"static_analysis","label":"Static analysis","limitations":["One or more analyzers emitted warnings; report findings remain usable but should be read with limitations."],"next_step":"Normalize detector output into one deduped finding set.","order":4,"status":"partial"},{"blockers":[],"completed_at":"2026-10-04T00:36:48.799Z","description":"Dedupe detectors, classify vulnerability classes and compute severity-weighted risk.","elapsed_ms":1150,"findings_count":138,"id":"finding_normalization","label":"Finding normalization","limitations":[],"next_step":"Review exploitability conservatively against confidence and limitations.","order":5,"status":"passed"},{"blockers":[],"completed_at":"2026-10-04T00:36:48.799Z","description":"Frame automated findings with conservative exploitability and limitation notes.","elapsed_ms":1900,"findings_count":138,"id":"exploitability_review","label":"Exploitability review","limitations":["Automated exploitability review is conservative and does not replace a manual exploitability assessment."],"next_step":"Draft remediation notes from the normalized evidence.","order":6,"status":"partial"},{"blockers":[],"completed_at":"2026-10-04T00:36:48.799Z","description":"Prepare remediation-oriented evidence for the shareable report artifact.","elapsed_ms":1500,"findings_count":138,"id":"remediation_draft","label":"Remediation draft","limitations":["Remediation notes are generated from detector evidence and require project-specific engineering review."],"next_step":"Attach an operator review artifact before claiming human review.","order":7,"status":"partial"},{"blockers":["No operator review artifact is attached to this automated scan."],"completed_at":"2026-10-04T00:36:48.799Z","description":"Record whether a human operator artifact exists before buyer escalation.","elapsed_ms":0,"id":"operator_review","label":"Operator review","limitations":["Human operator review has not been attached to this automated scan yet."],"next_step":"Attach a real operator review artifact before claiming human review.","order":8,"status":"blocked"},{"artifact":{"created_at":"2026-10-04T00:36:48.799Z","id":"solidity-2f746d702f766567","label":"Automated Solidity report","type":"report"},"blockers":[],"completed_at":"2026-10-04T00:36:48.799Z","description":"Publish the automated report artifact or explain why the scan failed closed.","elapsed_ms":620,"findings_count":138,"id":"finalization","label":"Finalization","limitations":["Final report is an automated static-analysis artifact; no operator review artifact is attached."],"next_step":"Share the report with explicit limitations and review state.","order":9,"status":"partial"}],"counts":{"access-control":5,"centralization":0,"flash-loan":0,"front-running":0,"gas-dos":0,"logic":48,"math-overflow":0,"oracle-manipulation":0,"other":72,"reentrancy":7,"timestamp-dependence":0,"unchecked-call":1,"uninitialized":5},"executive_summary":["138 findings surfaced (0 critical, 2 high, 22 medium, 10 low, 104 informational).","HIGH · Upgradeable-style initialize function is public/external without an initializer guard — exploitability medium.","HIGH · Unitroller.fallback() (contracts/Unitroller.sol#135-147) uses delegatecall to a input-controlled function id (fallback) — exploitability medium.","Automated static analysis only. A human operator review has not been attached to this report."],"findings":[{"class":"access-control","confidence":"medium","description":"Upgradeable-style initialize function is public/external without an initializer guard. Attackers can initialize an unprotected implementation or proxy and seize privileged state. Add an initializer modifier and disable implementation initializers.","end_line":31,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"bb2c961c9c9d1b6448b2804c958897c006e740eb93dd14fdb1ad50053419d81f","line":26,"references":["https://github.com/JE4NVRG/vegasec/blob/main/apps/web/src/lib/risk/solidity/semgrep-rules/vegasec-solidity.yml#vegasec-unprotected-initializer"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"semgrep:vegasec-unprotected-initializer","severity":"high","source":"semgrep","title":"Upgradeable-style initialize function is public/external without an initializer guard"},{"class":"access-control","component":"fallback","confidence":"medium","description":"Unitroller.fallback() (contracts/Unitroller.sol#135-147) uses delegatecall to a input-controlled function id\n\t- (success,None) = comptrollerImplementation.delegatecall(msg.data) (contracts/Unitroller.sol#137)\n","end_line":147,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/Unitroller.sol","id":"eb6c57e1e188c687c63e29c4dd1dd20d0eae40125804e1f0b240b00b4d4ad02a","line":135,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#controlled-delegatecall"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:controlled-delegatecall","severity":"high","source":"slither","title":"Unitroller.fallback() (contracts/Unitroller.sol#135-147) uses delegatecall to a input-controlled function id"},{"class":"logic","component":"initialize","confidence":"high","description":"CToken.initialize(ComptrollerInterface,InterestRateModel,uint256,string,string,uint8) (contracts/CToken.sol#26-57) uses a dangerous strict equality:\n\t- require(bool,string)(err == uint256(Error.NO_ERROR),setting comptroller failed) (contracts/CToken.sol#41)\n","end_line":57,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"0d3146c14839ccb8114c87f482e9e653c786719f4f21cf0358d3e54d471aad43","line":26,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.initialize(ComptrollerInterface,InterestRateModel,uint256,string,string,uint8) (contracts/CToken.sol#26-57) uses a dangerous strict equality:"},{"class":"logic","component":"transfer","confidence":"high","description":"CToken.transfer(address,uint256) (contracts/CToken.sol#135-137) uses a dangerous strict equality:\n\t- transferTokens(msg.sender,msg.sender,dst,amount) == uint256(Error.NO_ERROR) (contracts/CToken.sol#136)\n","end_line":137,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"f4527cbed1e6c1b931c3f1d9175778dca89316f22ae4482b2b1ceb882e3465be","line":135,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.transfer(address,uint256) (contracts/CToken.sol#135-137) uses a dangerous strict equality:"},{"class":"logic","component":"transferFrom","confidence":"high","description":"CToken.transferFrom(address,address,uint256) (contracts/CToken.sol#146-148) uses a dangerous strict equality:\n\t- transferTokens(msg.sender,src,dst,amount) == uint256(Error.NO_ERROR) (contracts/CToken.sol#147)\n","end_line":148,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"5a432213e3cb2747bcc4c1fbf86b7baf25caa21748d0aa918602782bda17b737","line":146,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.transferFrom(address,address,uint256) (contracts/CToken.sol#146-148) uses a dangerous strict equality:"},{"class":"logic","component":"balanceOfUnderlying","confidence":"high","description":"CToken.balanceOfUnderlying(address) (contracts/CToken.sol#190-195) uses a dangerous strict equality:\n\t- require(bool,string)(mErr == MathError.NO_ERROR,balance could not be calculated) (contracts/CToken.sol#193)\n","end_line":195,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"870697755c61f816e458ef420e2b3ea2cc0196fa89114186b44c041455e7b104","line":190,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.balanceOfUnderlying(address) (contracts/CToken.sol#190-195) uses a dangerous strict equality:"},{"class":"logic","component":"borrowBalanceStored","confidence":"high","description":"CToken.borrowBalanceStored(address) (contracts/CToken.sol#271-275) uses a dangerous strict equality:\n\t- require(bool,string)(err == MathError.NO_ERROR,borrowBalanceStored: borrowBalanceStoredInternal failed) (contracts/CToken.sol#273)\n","end_line":275,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"398ba9b8020c3299eac346ac6eef5f03b70bedeca2e1cc06fb5ad80a0d973bfc","line":271,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.borrowBalanceStored(address) (contracts/CToken.sol#271-275) uses a dangerous strict equality:"},{"class":"logic","component":"exchangeRateStored","confidence":"high","description":"CToken.exchangeRateStored() (contracts/CToken.sol#328-332) uses a dangerous strict equality:\n\t- require(bool,string)(err == MathError.NO_ERROR,exchangeRateStored: exchangeRateStoredInternal failed) (contracts/CToken.sol#330)\n","end_line":332,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"3ff4e0c464039b081cb51c234917ed594c0fb22088dbb66490099621772dc121","line":328,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.exchangeRateStored() (contracts/CToken.sol#328-332) uses a dangerous strict equality:"},{"class":"logic","component":"exchangeRateStoredInternal","confidence":"high","description":"CToken.exchangeRateStoredInternal() (contracts/CToken.sol#339-369) uses a dangerous strict equality:\n\t- _totalSupply == 0 (contracts/CToken.sol#341)\n","end_line":369,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"51a20f76f745c7c25696d020bf1905d9a9a24c7b87928f6b2f583c166bd4c442","line":339,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.exchangeRateStoredInternal() (contracts/CToken.sol#339-369) uses a dangerous strict equality:"},{"class":"logic","component":"accrueInterest","confidence":"high","description":"CToken.accrueInterest() (contracts/CToken.sol#384-462) uses a dangerous strict equality:\n\t- require(bool,string)(mathErr == MathError.NO_ERROR,could not calculate block delta) (contracts/CToken.sol#406)\n","end_line":462,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"75cbc91abe3537809c4b216f9f35903de74e1ba34b58ce62303696e4838f03a0","line":384,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.accrueInterest() (contracts/CToken.sol#384-462) uses a dangerous strict equality:"},{"class":"logic","component":"mintFresh","confidence":"high","description":"CToken.mintFresh(address,uint256) (contracts/CToken.sol#497-561) uses a dangerous strict equality:\n\t- require(bool,string)(vars.mathErr == MathError.NO_ERROR,MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED) (contracts/CToken.sol#547)\n","end_line":561,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"29c42f2ea4fb5e66fe91d80ba4cb6ba904533f92a764ebcc9072a9f3aed484e5","line":497,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.mintFresh(address,uint256) (contracts/CToken.sol#497-561) uses a dangerous strict equality:"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.mintFresh(address,uint256).vars (contracts/CToken.sol#509) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"5aa49507ce252bdf2e518a43ba1ec0903ffcc22ec9a90ee9e05783f0b41fb2f2","line":509,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.mintFresh(address,uint256).vars (contracts/CToken.sol#509) is a local variable never initialized"},{"class":"reentrancy","component":"redeemFresh","confidence":"medium","description":"Reentrancy in CToken.redeemFresh(address,uint256,uint256) (contracts/CToken.sol#613-707):\n\tExternal calls:\n\t- allowed = comptroller.redeemAllowed(address(this),redeemer,vars.redeemTokens) (contracts/CToken.sol#653)\n\tState variables written after the call(s):\n\t- totalSupply = vars.totalSupplyNew (contracts/CToken.sol#696)\n\tCTokenStorage.totalSupply (contracts/CTokenInterfaces.sol#91) can be used in cross function reentrancies:\n\t- CToken.exchangeRateStoredInternal() (contracts/CToken.sol#339-369)\n\t- CTokenStorage.totalSupply (contracts/CTokenInterfaces.sol#91)\n","end_line":707,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"8c934683f765f5702deb311f7010a00abdaffce387655e88f777f3bb514e98cb","line":613,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-no-eth"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-no-eth","severity":"medium","source":"slither","title":"Reentrancy in CToken.redeemFresh(address,uint256,uint256) (contracts/CToken.sol#613-707):"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.redeemFresh(address,uint256,uint256).vars (contracts/CToken.sol#616) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"0e6013ae9f6b6aff463d84aa42918c7e5bdea7ca10adb933399a5c0e1e594918","line":616,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.redeemFresh(address,uint256,uint256).vars (contracts/CToken.sol#616) is a local variable never initialized"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.borrowFresh(address,uint256).vars (contracts/CToken.sol#753) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"dfaba343324115e9f2167fca3e0f76ff12f0cbcd64908e7e12f014eb7eee39a3","line":753,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.borrowFresh(address,uint256).vars (contracts/CToken.sol#753) is a local variable never initialized"},{"class":"logic","component":"repayBorrowFresh","confidence":"high","description":"CToken.repayBorrowFresh(address,address,uint256) (contracts/CToken.sol#850-916) uses a dangerous strict equality:\n\t- require(bool,string)(vars.mathErr == MathError.NO_ERROR,REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED) (contracts/CToken.sol#902)\n","end_line":916,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"27b57976ff5fe0d1db4969cd413b07e605ae5fa2bf4c72a1f0d1a3d0b90008ad","line":850,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.repayBorrowFresh(address,address,uint256) (contracts/CToken.sol#850-916) uses a dangerous strict equality:"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.repayBorrowFresh(address,address,uint256).vars (contracts/CToken.sol#862) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"e71d79a6f3c49afd6c2f7ac29fb029ab8711b3280728ee65b2bd9cf38595ddf2","line":862,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.repayBorrowFresh(address,address,uint256).vars (contracts/CToken.sol#862) is a local variable never initialized"},{"class":"reentrancy","component":"liquidateBorrowInternal","confidence":"medium","description":"Reentrancy in CToken.liquidateBorrowInternal(address,uint256,CTokenInterface) (contracts/CToken.sol#926-941):\n\tExternal calls:\n\t- error = cTokenCollateral.accrueInterest() (contracts/CToken.sol#933)\n\t- liquidateBorrowFresh(msg.sender,borrower,repayAmount,cTokenCollateral) (contracts/CToken.sol#940)\n\t\t- allowed = comptroller.seizeAllowed(address(this),seizerToken,liquidator,borrower,seizeTokens) (contracts/CToken.sol#1047)\n\t\t- allowed = comptroller.repayBorrowAllowed(address(this),payer,borrower,repayAmount) (contracts/CToken.sol#852)\n\t\t- allowed = comptroller.liquidateBorrowAllowed(address(this),address(cTokenCollateral),liquidator,borrower,repayAmount) (contracts/CToken.sol#954)\n\t\t- comptroller.seizeVerify(address(this),seizerToken,liquidator,borrower,seizeTokens) (contracts/CToken.sol#1088)\n\t\t- comptroller.repayBorrowVerify(address(this),payer,borrower,vars.actualRepayAmount,vars.borrowerIndex) (contracts/CToken.sol#913)\n\t\t- seizeError = cTokenCollateral.seize(liquidator,borrower,seizeTokens) (contracts/CToken.sol#1007)\n\t\t- comptroller.liquidateBorrowVerify(address(this),address(cTokenCollateral),liquidator,borrower,actualRepayAmount,seizeTokens) (contracts/CToken.sol#1017)\n\tState variables written after the call(s):\n\t- liquidateBorrowFresh(msg.sender,borrower,repayAmount,cTokenCollateral) (contracts/CToken.sol#940)\n\t\t- totalBorrows = vars.totalBorrowsNew (contracts/CToken.sol#907)\n\tCTokenStorage.totalBorrows (contracts/CTokenInterfaces.sol#81) can be used in cross function reentrancies:\n\t- CToken.accrueInterest() (contracts/CToken.sol#384-462)\n\t- CToken.borrowRatePerBlock() (contracts/CToken.sol#235-237)\n\t- CToken.exchangeRateStoredInternal() (contracts/CToken.sol#339-369)\n\t- CToken.supplyRatePerBlock() (contracts/CToken.sol#243-245)\n\t- CTokenStorage.totalBorrows (contracts/CTokenInterfaces.sol#81)\n","end_line":941,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"ef7c5e62aae596190d8dff09462d6b246f27aeed30f6e333664dd34e858fa714","line":926,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-no-eth"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-no-eth","severity":"medium","source":"slither","title":"Reentrancy in CToken.liquidateBorrowInternal(address,uint256,CTokenInterface) (contracts/CToken.sol#926-941):"},{"class":"logic","component":"liquidateBorrowFresh","confidence":"high","description":"CToken.liquidateBorrowFresh(address,address,uint256,CTokenInterface) (contracts/CToken.sol#952-1020) uses a dangerous strict equality:\n\t- require(bool,string)(amountSeizeError == uint256(Error.NO_ERROR),LIQUIDATE_COMPTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED) (contracts/CToken.sol#997)\n","end_line":1020,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CToken.sol","id":"ebd5fc044b515eb41fe7b61e095d586da3a6cace9818c7b0aa1a384e4ca84a8c","line":952,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.liquidateBorrowFresh(address,address,uint256,CTokenInterface) (contracts/CToken.sol#952-1020) uses a dangerous strict equality:"},{"class":"uninitialized","component":"actualAddAmount","confidence":"medium","description":"CToken._addReservesFresh(uint256).actualAddAmount (contracts/CToken.sol#1241) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"a3b7a9871cb69a6262a39d7e7e550bc920393e3b5a1ec7b8558a5b6c49a8696f","line":1241,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken._addReservesFresh(uint256).actualAddAmount (contracts/CToken.sol#1241) is a local variable never initialized"},{"class":"logic","component":"mulUInt","confidence":"high","description":"CarefulMath.mulUInt(uint256,uint256) (contracts/CarefulMath.sol#24-36) uses a dangerous strict equality:\n\t- a == 0 (contracts/CarefulMath.sol#25)\n","end_line":36,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CarefulMath.sol","id":"92fed269aaa4f989bc7c621f7c6a01326b87b526ff6f32728517e1c50632d387","line":24,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CarefulMath.mulUInt(uint256,uint256) (contracts/CarefulMath.sol#24-36) uses a dangerous strict equality:"},{"class":"logic","component":"divUInt","confidence":"high","description":"CarefulMath.divUInt(uint256,uint256) (contracts/CarefulMath.sol#41-47) uses a dangerous strict equality:\n\t- b == 0 (contracts/CarefulMath.sol#42)\n","end_line":47,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/CarefulMath.sol","id":"d056a368715d01c8f74c8dcd0ef7935c464fe64e455f2f9899ca3a221ac5ac8a","line":41,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CarefulMath.divUInt(uint256,uint256) (contracts/CarefulMath.sol#41-47) uses a dangerous strict equality:"},{"class":"other","component":"EIP20NonStandardInterface","confidence":"high","description":"EIP20NonStandardInterface (contracts/EIP20NonStandardInterface.sol#8-70) has incorrect ERC20 function interface:EIP20NonStandardInterface.transferFrom(address,address,uint256) (contracts/EIP20NonStandardInterface.sol#48)\n","end_line":70,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/EIP20NonStandardInterface.sol","id":"470160b8998b07d1718bb884be18143453560a4112acfbe54e7b9d91375c4801","line":8,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#erc20-interface"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:erc20-interface","severity":"medium","source":"slither","title":"EIP20NonStandardInterface (contracts/EIP20NonStandardInterface.sol#8-70) has incorrect ERC20 function interface:EIP20NonStandardInterface.transferFrom(address,a"},{"class":"logic","component":"mulExp","confidence":"high","description":"Exponential.mulExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#146-166) uses a dangerous strict equality:\n\t- assert(bool)(err2 == MathError.NO_ERROR) (contracts/Exponential.sol#163)\n","end_line":166,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/Exponential.sol","id":"983f28dc2d09d18bf23418af64b5d57e45028e07a6303e20dfe4f410ec7cb8ed","line":146,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"Exponential.mulExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#146-166) uses a dangerous strict equality:"},{"class":"other","component":"initialize","confidence":"medium","description":"CToken.initialize(ComptrollerInterface,InterestRateModel,uint256,string,string,uint8) (contracts/CToken.sol#26-57) should emit an event for: \n\t- initialExchangeRateMantissa = initialExchangeRateMantissa_ (contracts/CToken.sol#36) \n","end_line":57,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"05d22babd06a702725dd1cea4a86002ccbca3f9f08ea3953f91585d703bc947f","line":26,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#events-maths"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:events-maths","severity":"low","source":"slither","title":"CToken.initialize(ComptrollerInterface,InterestRateModel,uint256,string,string,uint8) (contracts/CToken.sol#26-57) should emit an event for:"},{"class":"reentrancy","component":"mintFresh","confidence":"medium","description":"Reentrancy in CToken.mintFresh(address,uint256) (contracts/CToken.sol#497-561):\n\tExternal calls:\n\t- allowed = comptroller.mintAllowed(address(this),minter,mintAmount) (contracts/CToken.sol#499)\n\tEvent emitted after the call(s):\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- (failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.MINT_COMPTROLLER_REJECTION,allowed),0) (contracts/CToken.sol#501)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- (failOpaque(Error.MATH_ERROR,FailureInfo.MINT_EXCHANGE_RATE_READ_FAILED,uint256(vars.mathErr)),0) (contracts/CToken.sol#513)\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- (fail(Error.MARKET_NOT_FRESH,FailureInfo.MINT_FRESHNESS_CHECK),0) (contracts/CToken.sol#506)\n\t- Mint(minter,vars.actualMintAmount,vars.mintTokens) (contracts/CToken.sol#554)\n\t- Transfer(address(this),minter,vars.mintTokens) (contracts/CToken.sol#555)\n","end_line":561,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"744b07890edda432fdb57e1c06e03bdec271dca42b21e6a049d8b4d5463d63fc","line":497,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.mintFresh(address,uint256) (contracts/CToken.sol#497-561):"},{"class":"reentrancy","component":"redeemFresh","confidence":"medium","description":"Reentrancy in CToken.redeemFresh(address,uint256,uint256) (contracts/CToken.sol#613-707):\n\tExternal calls:\n\t- allowed = comptroller.redeemAllowed(address(this),redeemer,vars.redeemTokens) (contracts/CToken.sol#653)\n\tEvent emitted after the call(s):\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- fail(Error.MARKET_NOT_FRESH,FailureInfo.REDEEM_FRESHNESS_CHECK) (contracts/CToken.sol#660)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (contracts/CToken.sol#675)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,uint256(vars.mathErr)) (contracts/CToken.sol#670)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.REDEEM_COMPTROLLER_REJECTION,allowed) (contracts/CToken.sol#655)\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- fail(Error.TOKEN_INSUFFICIENT_CASH,FailureInfo.REDEEM_TRANSFER_OUT_NOT_POSSIBLE) (contracts/CToken.sol#680)\n\t- Redeem(redeemer,vars.redeemAmount,vars.redeemTokens) (contracts/CToken.sol#701)\n\t- Transfer(redeemer,address(this),vars.redeemTokens) (contracts/CToken.sol#700)\n","end_line":707,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"d8129b6a883ba134f1498355e8fb6ba06440ef58893e348c00aef47b5f69950e","line":613,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.redeemFresh(address,uint256,uint256) (contracts/CToken.sol#613-707):"},{"class":"reentrancy","component":"borrowFresh","confidence":"medium","description":"Reentrancy in CToken.borrowFresh(address,uint256) (contracts/CToken.sol#736-799):\n\tExternal calls:\n\t- allowed = comptroller.borrowAllowed(address(this),borrower,borrowAmount) (contracts/CToken.sol#738)\n\tEvent emitted after the call(s):\n\t- Borrow(borrower,borrowAmount,vars.accountBorrowsNew,vars.totalBorrowsNew) (contracts/CToken.sol#793)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (contracts/CToken.sol#762)\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- fail(Error.MARKET_NOT_FRESH,FailureInfo.BORROW_FRESHNESS_CHECK) (contracts/CToken.sol#745)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (contracts/CToken.sol#767)\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- fail(Error.TOKEN_INSUFFICIENT_CASH,FailureInfo.BORROW_CASH_NOT_AVAILABLE) (contracts/CToken.sol#750)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.BORROW_COMPTROLLER_REJECTION,allowed) (contracts/CToken.sol#740)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (contracts/CToken.sol#772)\n","end_line":799,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"8c4e7e6dd6628b449440739b27631db15e6652d44539b0430b06834f1fe289b7","line":736,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.borrowFresh(address,uint256) (contracts/CToken.sol#736-799):"},{"class":"reentrancy","component":"repayBorrowFresh","confidence":"medium","description":"Reentrancy in CToken.repayBorrowFresh(address,address,uint256) (contracts/CToken.sol#850-916):\n\tExternal calls:\n\t- allowed = comptroller.repayBorrowAllowed(address(this),payer,borrower,repayAmount) (contracts/CToken.sol#852)\n\tEvent emitted after the call(s):\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- (fail(Error.MARKET_NOT_FRESH,FailureInfo.REPAY_BORROW_FRESHNESS_CHECK),0) (contracts/CToken.sol#859)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- (failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.REPAY_BORROW_COMPTROLLER_REJECTION,allowed),0) (contracts/CToken.sol#854)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- (failOpaque(Error.MATH_ERROR,FailureInfo.REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)),0) (contracts/CToken.sol#870)\n\t- RepayBorrow(payer,borrower,vars.actualRepayAmount,vars.accountBorrowsNew,vars.totalBorrowsNew) (contracts/CToken.sol#910)\n","end_line":916,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"79bdecabfaa5688502a3c09d920a382d624a4599458da310be6a1602f9370c41","line":850,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.repayBorrowFresh(address,address,uint256) (contracts/CToken.sol#850-916):"},{"class":"reentrancy","component":"liquidateBorrowFresh","confidence":"medium","description":"Reentrancy in CToken.liquidateBorrowFresh(address,address,uint256,CTokenInterface) (contracts/CToken.sol#952-1020):\n\tExternal calls:\n\t- allowed = comptroller.liquidateBorrowAllowed(address(this),address(cTokenCollateral),liquidator,borrower,repayAmount) (contracts/CToken.sol#954)\n\tEvent emitted after the call(s):\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- (fail(Error.MARKET_NOT_FRESH,FailureInfo.LIQUIDATE_COLLATERAL_FRESHNESS_CHECK),0) (contracts/CToken.sol#966)\n\t- Failure(uint256(err),uint256(info),opaqueError) (contracts/ErrorReporter.sol#203)\n\t\t- (failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.LIQUIDATE_COMPTROLLER_REJECTION,allowed),0) (contracts/CToken.sol#956)\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- (fail(Error.INVALID_ACCOUNT_PAIR,FailureInfo.LIQUIDATE_LIQUIDATOR_IS_BORROWER),0) (contracts/CToken.sol#971)\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- (fail(Error.MARKET_NOT_FRESH,FailureInfo.LIQUIDATE_FRESHNESS_CHECK),0) (contracts/CToken.sol#961)\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- (fail(Error.INVALID_CLOSE_AMOUNT_REQUESTED,FailureInfo.LIQUIDATE_CLOSE_AMOUNT_IS_ZERO),0) (contracts/CToken.sol#976)\n\t- Failure(uint256(err),uint256(info),0) (contracts/ErrorReporter.sol#194)\n\t\t- (fail(Error.INVALID_CLOSE_AMOUNT_REQUESTED,FailureInfo.LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX),0) (contracts/CToken.sol#981)\n","end_line":1020,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"8e2db6cd6459efb8de16504e2660988ec81d295a2fa07309ac4e0e56e9acd5a8","line":952,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.liquidateBorrowFresh(address,address,uint256,CTokenInterface) (contracts/CToken.sol#952-1020):"},{"class":"access-control","component":"newPendingAdmin","confidence":"medium","description":"CToken._setPendingAdmin(address).newPendingAdmin (contracts/CToken.sol#1102) lacks a zero-check on :\n\t\t- pendingAdmin = newPendingAdmin (contracts/CToken.sol#1112)\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/CToken.sol","id":"c745ce5494287936109408bddf0cf2ef5855cafe5434a2401f6b755d6139d22b","line":1102,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#missing-zero-check"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:missing-zero-check","severity":"low","source":"slither","title":"CToken._setPendingAdmin(address).newPendingAdmin (contracts/CToken.sol#1102) lacks a zero-check on :"},{"class":"logic","component":"fraction","confidence":"high","description":"Exponential.divScalarByExpTruncate(uint256,Exponential.Exp).fraction (contracts/Exponential.sol#135) shadows:\n\t- Exponential.fraction(uint256,uint256) (contracts/Exponential.sol#347-349) (function)\n","exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"contracts/Exponential.sol","id":"0ff9cabdba08440d9adf3feaeb53dc6d8f0e61ebaa1baf2cbaf070f21ba03755","line":135,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#shadowing-local"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:shadowing-local","severity":"low","source":"slither","title":"Exponential.divScalarByExpTruncate(uint256,Exponential.Exp).fraction (contracts/Exponential.sol#135) shadows:"},{"class":"access-control","component":"newPendingImplementation","confidence":"medium","description":"Unitroller._setPendingImplementation(address).newPendingImplementation (contracts/Unitroller.sol#38) lacks a zero-check on :\n\t\t- pendingComptrollerImplementation = newPendingImplementation (contracts/Unitroller.sol#46)\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/Unitroller.sol","id":"2354c60cffb98496afe24858e51f1c770d7c381d2f4c9fe50e37f8df32092be6","line":38,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#missing-zero-check"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:missing-zero-check","severity":"low","source":"slither","title":"Unitroller._setPendingImplementation(address).newPendingImplementation (contracts/Unitroller.sol#38) lacks a zero-check on :"},{"class":"access-control","component":"newPendingAdmin","confidence":"medium","description":"Unitroller._setPendingAdmin(address).newPendingAdmin (contracts/Unitroller.sol#85) lacks a zero-check on :\n\t\t- pendingAdmin = newPendingAdmin (contracts/Unitroller.sol#95)\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"contracts/Unitroller.sol","id":"eb5a972beb40c762455166e0bee16801fc2d4a524e31eb802e776f093b73321f","line":85,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#missing-zero-check"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:missing-zero-check","severity":"low","source":"slither","title":"Unitroller._setPendingAdmin(address).newPendingAdmin (contracts/Unitroller.sol#85) lacks a zero-check on :"},{"class":"logic","component":"^0.5.16","confidence":"high","description":"Version constraint ^0.5.16 contains known severe issues (https://solidity.readthedocs.io/en/latest/bugs.html)\n\t- AbiReencodingHeadOverflowWithStaticArrayCleanup\n\t- DirtyBytesArrayToStorage\n\t- NestedCalldataArrayAbiReencodingSizeValidation\n\t- ABIDecodeTwoDimensionalArrayMemory\n\t- KeccakCaching\n\t- EmptyByteArrayCopy\n\t- DynamicArrayCleanup\n\t- MissingEscapingInFormatting\n\t- ImplicitConstructorCallvalueCheck\n\t- TupleAssignmentMultiStackSlotComponents\n\t- MemoryArrayCreationOverflow\n\t- privateCanBeOverridden.\nIt is used by:\n\t- ^0.5.16 (contracts/CToken.sol#1)\n\t- ^0.5.16 (contracts/CTokenInterfaces.sol#1)\n\t- ^0.5.16 (contracts/CarefulMath.sol#1)\n\t- ^0.5.16 (contracts/ComptrollerInterface.sol#1)\n\t- ^0.5.16 (contracts/ComptrollerStorage.sol#1)\n\t- ^0.5.16 (contracts/EIP20Interface.sol#1)\n\t- ^0.5.16 (contracts/EIP20NonStandardInterface.sol#1)\n\t- ^0.5.16 (contracts/ErrorReporter.sol#1)\n\t- ^0.5.16 (contracts/Exponential.sol#1)\n\t- ^0.5.16 (contracts/InterestRateModel.sol#1)\n\t- ^0.5.16 (contracts/PriceOracle.sol#1)\n\t- ^0.5.16 (contracts/Unitroller.sol#1)\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"6009e8a5173cca5a490ecb44f2973337c25b701ac0ed4b77b390c225a9f12d56","line":1,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#solc-version"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:solc-version","severity":"informational","source":"slither","title":"Version constraint ^0.5.16 contains known severe issues (https://solidity.readthedocs.io/en/latest/bugs.html)"},{"class":"other","component":"CToken","confidence":"high","description":"CToken (contracts/CToken.sol#16-1428) does not implement functions:\n\t- CToken.doTransferIn(address,uint256) (contracts/CToken.sol#1407)\n\t- CToken.doTransferOut(address,uint256) (contracts/CToken.sol#1414)\n\t- CToken.getCashPrior() (contracts/CToken.sol#1401)\n","end_line":1428,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"f786cab4313c01ea157f616475f4ac5e3929a0554fd12e79c3ad12cb0689caa6","line":16,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unimplemented-functions"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unimplemented-functions","severity":"informational","source":"slither","title":"CToken (contracts/CToken.sol#16-1428) does not implement functions:"},{"class":"logic","component":"initialize","confidence":"high","description":"initialize(ComptrollerInterface,InterestRateModel,uint256,string,string,uint8) should be declared external:\n\t- CToken.initialize(ComptrollerInterface,InterestRateModel,uint256,string,string,uint8) (contracts/CToken.sol#26-57)\nMoreover, the following function parameters should change its data location:\nname_ location should be calldata\nsymbol_ location should be calldata\n","end_line":57,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"82b1b4d348a601e4e602ba56019dfe4d6540d5a4b7832565e224d92b8adcf79e","line":26,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#external-function"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:external-function","severity":"informational","source":"slither","title":"initialize(ComptrollerInterface,InterestRateModel,uint256,string,string,uint8) should be declared external:"},{"class":"other","component":"mintInternal","confidence":"medium","description":"CToken.mintInternal(uint256) (contracts/CToken.sol#470-478) is never used and should be removed\n","end_line":478,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"845a12be091c2b72cfb0f4541ec70da2df3a872d7ab04e4f4e3a3728d97b9fcc","line":470,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.mintInternal(uint256) (contracts/CToken.sol#470-478) is never used and should be removed"},{"class":"other","component":"mintFresh","confidence":"medium","description":"CToken.mintFresh(address,uint256) (contracts/CToken.sol#497-561) is never used and should be removed\n","end_line":561,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"f1432466e09437750aaf373ecbd0640e8b7d45a34198f94b17bf5b85321d0757","line":497,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.mintFresh(address,uint256) (contracts/CToken.sol#497-561) is never used and should be removed"},{"class":"other","component":"redeemInternal","confidence":"medium","description":"CToken.redeemInternal(uint256) (contracts/CToken.sol#569-577) is never used and should be removed\n","end_line":577,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"ae687403fcfac0e4e24964261d52d346249f030b0f6e907a6ff6ab40413b1e46","line":569,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.redeemInternal(uint256) (contracts/CToken.sol#569-577) is never used and should be removed"},{"class":"other","component":"redeemUnderlyingInternal","confidence":"medium","description":"CToken.redeemUnderlyingInternal(uint256) (contracts/CToken.sol#585-593) is never used and should be removed\n","end_line":593,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"e9e84675bc0bc06168afb270521e62e3f2ddaf717d008a9d1c9d5d4afc10c676","line":585,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.redeemUnderlyingInternal(uint256) (contracts/CToken.sol#585-593) is never used and should be removed"},{"class":"other","component":"redeemFresh","confidence":"medium","description":"CToken.redeemFresh(address,uint256,uint256) (contracts/CToken.sol#613-707) is never used and should be removed\n","end_line":707,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"53615e21fe2590c1336d4a7b468963db41fea9bac535b0dc68bc11f133fee371","line":613,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.redeemFresh(address,uint256,uint256) (contracts/CToken.sol#613-707) is never used and should be removed"},{"class":"other","component":"borrowInternal","confidence":"medium","description":"CToken.borrowInternal(uint256) (contracts/CToken.sol#714-722) is never used and should be removed\n","end_line":722,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"42f150141f7222565cb3222b4d5bbde4f050145b24df55b33a63cf08dcb39a42","line":714,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.borrowInternal(uint256) (contracts/CToken.sol#714-722) is never used and should be removed"},{"class":"other","component":"borrowFresh","confidence":"medium","description":"CToken.borrowFresh(address,uint256) (contracts/CToken.sol#736-799) is never used and should be removed\n","end_line":799,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"9412f8e1de7c71828e7722e2f9ae7814de1cd946d492c3b313442f8d5da7aec1","line":736,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.borrowFresh(address,uint256) (contracts/CToken.sol#736-799) is never used and should be removed"},{"class":"other","component":"repayBorrowInternal","confidence":"medium","description":"CToken.repayBorrowInternal(uint256) (contracts/CToken.sol#806-814) is never used and should be removed\n","end_line":814,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"d042eeb99c8858b723c707653fbcde3b121c3fffeb2143fb931a29a128177006","line":806,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.repayBorrowInternal(uint256) (contracts/CToken.sol#806-814) is never used and should be removed"},{"class":"other","component":"repayBorrowBehalfInternal","confidence":"medium","description":"CToken.repayBorrowBehalfInternal(address,uint256) (contracts/CToken.sol#822-830) is never used and should be removed\n","end_line":830,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"e589b2e828a61712e2aa653b475adbe92e1f0b74e10145d2ec364d59345b0dc1","line":822,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.repayBorrowBehalfInternal(address,uint256) (contracts/CToken.sol#822-830) is never used and should be removed"},{"class":"other","component":"repayBorrowFresh","confidence":"medium","description":"CToken.repayBorrowFresh(address,address,uint256) (contracts/CToken.sol#850-916) is never used and should be removed\n","end_line":916,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"1062b16e478f96158a7c6b4b6b7d35a1a85e7adcbcf1e209b65bd8dcc215d345","line":850,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.repayBorrowFresh(address,address,uint256) (contracts/CToken.sol#850-916) is never used and should be removed"},{"class":"other","component":"liquidateBorrowInternal","confidence":"medium","description":"CToken.liquidateBorrowInternal(address,uint256,CTokenInterface) (contracts/CToken.sol#926-941) is never used and should be removed\n","end_line":941,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"99d8945f805e7b76a34e1d7fbc83b99cb2ea2164b6c75137a25713dddcadbe97","line":926,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.liquidateBorrowInternal(address,uint256,CTokenInterface) (contracts/CToken.sol#926-941) is never used and should be removed"},{"class":"other","component":"liquidateBorrowFresh","confidence":"medium","description":"CToken.liquidateBorrowFresh(address,address,uint256,CTokenInterface) (contracts/CToken.sol#952-1020) is never used and should be removed\n","end_line":1020,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"7983007cb29fec4619ad37697384f502d77f6d7ba4125fa3eb75fa64a75f327d","line":952,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.liquidateBorrowFresh(address,address,uint256,CTokenInterface) (contracts/CToken.sol#952-1020) is never used and should be removed"},{"class":"logic","component":"_setPendingAdmin","confidence":"high","description":"Function CToken._setPendingAdmin(address) (contracts/CToken.sol#1102-1118) is not in mixedCase\n","end_line":1118,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"5096b3b74377760ebb497bc055b17f979c25eab062ff31b1e9130a5f4cf351df","line":1102,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._setPendingAdmin(address) (contracts/CToken.sol#1102-1118) is not in mixedCase"},{"class":"logic","component":"_acceptAdmin","confidence":"high","description":"Function CToken._acceptAdmin() (contracts/CToken.sol#1125-1145) is not in mixedCase\n","end_line":1145,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"623f6cb782d7028f1fe6ad4146392f821edf9b13c161bfbae159395987427f0e","line":1125,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._acceptAdmin() (contracts/CToken.sol#1125-1145) is not in mixedCase"},{"class":"logic","component":"_setComptroller","confidence":"high","description":"Function CToken._setComptroller(ComptrollerInterface) (contracts/CToken.sol#1152-1169) is not in mixedCase\n","end_line":1169,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"d3dff6ebf7dd8f61d9859d9595f8364437ae62901d33de3426769e49d8e9f484","line":1152,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._setComptroller(ComptrollerInterface) (contracts/CToken.sol#1152-1169) is not in mixedCase"},{"class":"logic","component":"_setReserveFactor","confidence":"high","description":"Function CToken._setReserveFactor(uint256) (contracts/CToken.sol#1176-1184) is not in mixedCase\n","end_line":1184,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"0785c6bf414a6e55544c41fbfc994777d8d1bd91f02f7d0f505862e7aa11f102","line":1176,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._setReserveFactor(uint256) (contracts/CToken.sol#1176-1184) is not in mixedCase"},{"class":"other","component":"_addReservesInternal","confidence":"medium","description":"CToken._addReservesInternal(uint256) (contracts/CToken.sol#1220-1230) is never used and should be removed\n","end_line":1230,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"f56da0e3e722fbb4a4e676bb819acec91794431b2d4eea456b8d6540b4817c02","line":1220,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken._addReservesInternal(uint256) (contracts/CToken.sol#1220-1230) is never used and should be removed"},{"class":"other","component":"_addReservesFresh","confidence":"medium","description":"CToken._addReservesFresh(uint256) (contracts/CToken.sol#1238-1275) is never used and should be removed\n","end_line":1275,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"fa36950f9c3871689497a2654132719af2a34f7c29f1bdaf8e8110da8e55855a","line":1238,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken._addReservesFresh(uint256) (contracts/CToken.sol#1238-1275) is never used and should be removed"},{"class":"logic","component":"_reduceReserves","confidence":"high","description":"Function CToken._reduceReserves(uint256) (contracts/CToken.sol#1283-1291) is not in mixedCase\n","end_line":1291,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"b0bf06a368c3d3f68418a019dce558f5371d72c38969c45bbbec3b8c7ff3c6fe","line":1283,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._reduceReserves(uint256) (contracts/CToken.sol#1283-1291) is not in mixedCase"},{"class":"logic","component":"_setInterestRateModel","confidence":"high","description":"Function CToken._setInterestRateModel(InterestRateModel) (contracts/CToken.sol#1348-1356) is not in mixedCase\n","end_line":1356,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CToken.sol","id":"91e0042b74e55e03d744f85a1e6093d117cf742246a0674a0d79380f9c4ece65","line":1348,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._setInterestRateModel(InterestRateModel) (contracts/CToken.sol#1348-1356) is not in mixedCase"},{"class":"logic","component":"borrowRateMaxMantissa","confidence":"high","description":"Constant CTokenStorage.borrowRateMaxMantissa (contracts/CTokenInterfaces.sol#31) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"0c90840f37de0bc3a6753a5ecdcb1fab70e6cb1168733bd5bca37a29b115db9a","line":31,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant CTokenStorage.borrowRateMaxMantissa (contracts/CTokenInterfaces.sol#31) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"logic","component":"reserveFactorMaxMantissa","confidence":"high","description":"Constant CTokenStorage.reserveFactorMaxMantissa (contracts/CTokenInterfaces.sol#36) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"80e559bd8cf92f276dd022a63677637715074e2b4611824840354c14e0d1b5da","line":36,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant CTokenStorage.reserveFactorMaxMantissa (contracts/CTokenInterfaces.sol#36) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"other","component":"Mint","confidence":"high","description":"Event CTokenInterface.Mint(address,uint256,uint256) (contracts/CTokenInterfaces.sol#136) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"2241887c66d72bd1b29fa9b30ac5fbb3ba866a21c0031e9635645f5de97421c5","line":136,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.Mint(address,uint256,uint256) (contracts/CTokenInterfaces.sol#136) has address parameters but no indexed parameters"},{"class":"other","component":"Redeem","confidence":"high","description":"Event CTokenInterface.Redeem(address,uint256,uint256) (contracts/CTokenInterfaces.sol#141) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"50f341dabd59800cee75a89068e989bd53220c2d705c8072a704efd1e33b61b0","line":141,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.Redeem(address,uint256,uint256) (contracts/CTokenInterfaces.sol#141) has address parameters but no indexed parameters"},{"class":"other","component":"Borrow","confidence":"high","description":"Event CTokenInterface.Borrow(address,uint256,uint256,uint256) (contracts/CTokenInterfaces.sol#146) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"fb3d41013e25c2adaaf2e0bb9d525aa78de9801f3b8ccdb0587fc1047a149ddd","line":146,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.Borrow(address,uint256,uint256,uint256) (contracts/CTokenInterfaces.sol#146) has address parameters but no indexed parameters"},{"class":"other","component":"RepayBorrow","confidence":"high","description":"Event CTokenInterface.RepayBorrow(address,address,uint256,uint256,uint256) (contracts/CTokenInterfaces.sol#151) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"5d70a3744931bfd7c35ed373d986eff40c54afc306684cb5a1aec284e2bc97bc","line":151,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.RepayBorrow(address,address,uint256,uint256,uint256) (contracts/CTokenInterfaces.sol#151) has address parameters but no indexed parameters"},{"class":"other","component":"LiquidateBorrow","confidence":"high","description":"Event CTokenInterface.LiquidateBorrow(address,address,uint256,address,uint256) (contracts/CTokenInterfaces.sol#156) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"a899e0d75cd0b7a765bd8a91482f2f534ea678cfa6dd5fb216987b08ba6aa613","line":156,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.LiquidateBorrow(address,address,uint256,address,uint256) (contracts/CTokenInterfaces.sol#156) has address parameters but no indexed parame"},{"class":"other","component":"NewPendingAdmin","confidence":"high","description":"Event CTokenInterface.NewPendingAdmin(address,address) (contracts/CTokenInterfaces.sol#164) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"c3fad045f9a2e4383904f0decc762efbde5a5d916d06355d9a952515010290b6","line":164,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.NewPendingAdmin(address,address) (contracts/CTokenInterfaces.sol#164) has address parameters but no indexed parameters"},{"class":"other","component":"NewAdmin","confidence":"high","description":"Event CTokenInterface.NewAdmin(address,address) (contracts/CTokenInterfaces.sol#169) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"f41f64870e3e21ee1487aa3dfe269f4dd923c2db321027ce0b846846345a6176","line":169,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.NewAdmin(address,address) (contracts/CTokenInterfaces.sol#169) has address parameters but no indexed parameters"},{"class":"other","component":"ReservesAdded","confidence":"high","description":"Event CTokenInterface.ReservesAdded(address,uint256,uint256) (contracts/CTokenInterfaces.sol#189) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"89115e9c8d19a6e3ad140bb9a1864d13317959c30fcf9f694fdc0506cd08fb0f","line":189,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.ReservesAdded(address,uint256,uint256) (contracts/CTokenInterfaces.sol#189) has address parameters but no indexed parameters"},{"class":"other","component":"ReservesReduced","confidence":"high","description":"Event CTokenInterface.ReservesReduced(address,uint256,uint256) (contracts/CTokenInterfaces.sol#194) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"f17824da4a8e3016ad3c887db0031ec159eedfa8ecc4329b3e3993e812a4c315","line":194,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CTokenInterface.ReservesReduced(address,uint256,uint256) (contracts/CTokenInterfaces.sol#194) has address parameters but no indexed parameters"},{"class":"logic","component":"_setPendingAdmin","confidence":"high","description":"Function CTokenInterface._setPendingAdmin(address) (contracts/CTokenInterfaces.sol#235) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"65bf81b94bbc6b999d051570e53b8fdd544d1e64abc41e9f702a1f83077d37a4","line":235,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CTokenInterface._setPendingAdmin(address) (contracts/CTokenInterfaces.sol#235) is not in mixedCase"},{"class":"logic","component":"_acceptAdmin","confidence":"high","description":"Function CTokenInterface._acceptAdmin() (contracts/CTokenInterfaces.sol#236) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"132568bf15a02d8d73fa0415ee4cf2d4a90437acdb63cfbeb1ab5817807f6e89","line":236,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CTokenInterface._acceptAdmin() (contracts/CTokenInterfaces.sol#236) is not in mixedCase"},{"class":"logic","component":"_setComptroller","confidence":"high","description":"Function CTokenInterface._setComptroller(ComptrollerInterface) (contracts/CTokenInterfaces.sol#237) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"30d369aef151815f8a22ea0fd56c0867888fc20a34141b29f4616317493fadf0","line":237,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CTokenInterface._setComptroller(ComptrollerInterface) (contracts/CTokenInterfaces.sol#237) is not in mixedCase"},{"class":"logic","component":"_setReserveFactor","confidence":"high","description":"Function CTokenInterface._setReserveFactor(uint256) (contracts/CTokenInterfaces.sol#238) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"f24d952a2ec3b4fa3fe4ffc59f2fea9a5743e768c73763c17f57ab293ca2d4d8","line":238,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CTokenInterface._setReserveFactor(uint256) (contracts/CTokenInterfaces.sol#238) is not in mixedCase"},{"class":"logic","component":"_reduceReserves","confidence":"high","description":"Function CTokenInterface._reduceReserves(uint256) (contracts/CTokenInterfaces.sol#239) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"7fb855d06cc6a9ee17e251c878f7e89e67d65ce1ad6db99e8e621e9e636f2664","line":239,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CTokenInterface._reduceReserves(uint256) (contracts/CTokenInterfaces.sol#239) is not in mixedCase"},{"class":"logic","component":"_setInterestRateModel","confidence":"high","description":"Function CTokenInterface._setInterestRateModel(InterestRateModel) (contracts/CTokenInterfaces.sol#240) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"13221a3e1f43e14b2c8dcbb40f3a204fa5b49e9bbb3f580777ac5ba4d12cf825","line":240,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CTokenInterface._setInterestRateModel(InterestRateModel) (contracts/CTokenInterfaces.sol#240) is not in mixedCase"},{"class":"logic","component":"_addReserves","confidence":"high","description":"Function CErc20Interface._addReserves(uint256) (contracts/CTokenInterfaces.sol#265) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"4bb5951136cf4bf411da36a1144275d9d6026ead28cd0d93dcfdb922ab1c3848","line":265,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CErc20Interface._addReserves(uint256) (contracts/CTokenInterfaces.sol#265) is not in mixedCase"},{"class":"other","component":"NewImplementation","confidence":"high","description":"Event CDelegatorInterface.NewImplementation(address,address) (contracts/CTokenInterfaces.sol#279) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"1e28a094b5355cba8d6484350ce20973907b73517a00fe482329e5b811e8e5d2","line":279,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CDelegatorInterface.NewImplementation(address,address) (contracts/CTokenInterfaces.sol#279) has address parameters but no indexed parameters"},{"class":"logic","component":"_setImplementation","confidence":"high","description":"_setImplementation(address,bool,bytes) should be declared external:\n\t- CDelegatorInterface._setImplementation(address,bool,bytes) (contracts/CTokenInterfaces.sol#287)\nMoreover, the following function parameters should change its data location:\nbecomeImplementationData location should be calldata\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"9b7b77e86f91cc0eda63b2b9aa30d5e0e542b259d37acd0686e8991b35699231","line":287,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#external-function"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:external-function","severity":"informational","source":"slither","title":"_setImplementation(address,bool,bytes) should be declared external:"},{"class":"logic","component":"_setImplementation","confidence":"high","description":"Function CDelegatorInterface._setImplementation(address,bool,bytes) (contracts/CTokenInterfaces.sol#287) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"68b172a20c7b1ac181d3cdab3629d906ed432fa3a2fb4ef4224b6ba7e7704648","line":287,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CDelegatorInterface._setImplementation(address,bool,bytes) (contracts/CTokenInterfaces.sol#287) is not in mixedCase"},{"class":"logic","component":"_becomeImplementation","confidence":"high","description":"_becomeImplementation(bytes) should be declared external:\n\t- CDelegateInterface._becomeImplementation(bytes) (contracts/CTokenInterfaces.sol#296)\nMoreover, the following function parameters should change its data location:\ndata location should be calldata\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"32c59329ea65f4c45195e1eaca19faa0b2b5b7186205bcb62b21fcece999dd1c","line":296,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#external-function"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:external-function","severity":"informational","source":"slither","title":"_becomeImplementation(bytes) should be declared external:"},{"class":"logic","component":"_becomeImplementation","confidence":"high","description":"Function CDelegateInterface._becomeImplementation(bytes) (contracts/CTokenInterfaces.sol#296) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"86bb9398f03fa35071449415d76198aa3ba60bc0f4d03657cc765667d69b8c06","line":296,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CDelegateInterface._becomeImplementation(bytes) (contracts/CTokenInterfaces.sol#296) is not in mixedCase"},{"class":"logic","component":"_resignImplementation","confidence":"high","description":"Function CDelegateInterface._resignImplementation() (contracts/CTokenInterfaces.sol#301) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/CTokenInterfaces.sol","id":"ff843fbe27079a762f7ffa7f241f1d453d32a7076efc1568154feeb1fee57e2c","line":301,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CDelegateInterface._resignImplementation() (contracts/CTokenInterfaces.sol#301) is not in mixedCase"},{"class":"logic","component":"_mintGuardianPaused","confidence":"high","description":"Variable ComptrollerV2Storage._mintGuardianPaused (contracts/ComptrollerStorage.sol#89) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/ComptrollerStorage.sol","id":"979a094586bd74b46e73439c93e1b0354a65abc19592b30ff490d43dc94e375a","line":89,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Variable ComptrollerV2Storage._mintGuardianPaused (contracts/ComptrollerStorage.sol#89) is not in mixedCase"},{"class":"logic","component":"_borrowGuardianPaused","confidence":"high","description":"Variable ComptrollerV2Storage._borrowGuardianPaused (contracts/ComptrollerStorage.sol#90) is not in mixedCase\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/ComptrollerStorage.sol","id":"a299df73b1c760cd7d81e6eae6dc58e782941452a88a5d042790f932c4ee31b7","line":90,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Variable ComptrollerV2Storage._borrowGuardianPaused (contracts/ComptrollerStorage.sol#90) is not in mixedCase"},{"class":"other","component":"failOpaque","confidence":"medium","description":"ComptrollerErrorReporter.failOpaque(ComptrollerErrorReporter.Error,ComptrollerErrorReporter.FailureInfo,uint256) (contracts/ErrorReporter.sol#66-70) is never used and should be removed\n","end_line":70,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/ErrorReporter.sol","id":"660b0e733d23ee2d3293abad997a2081bbb5f8bbea27169d625a2151b9bc088e","line":66,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"ComptrollerErrorReporter.failOpaque(ComptrollerErrorReporter.Error,ComptrollerErrorReporter.FailureInfo,uint256) (contracts/ErrorReporter.sol#66-70) is never us"},{"class":"logic","component":"expScale","confidence":"high","description":"Constant Exponential.expScale (contracts/Exponential.sol#13) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"b3403b08f881997a2821fe7acacefb638620cc1ec47f8c98628758301a4265d2","line":13,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant Exponential.expScale (contracts/Exponential.sol#13) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"logic","component":"doubleScale","confidence":"high","description":"Constant Exponential.doubleScale (contracts/Exponential.sol#14) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"84c8f8ed198dabe42c73ac49a17285b3a4fb67d098b98e2a7f05df2ec6d96078","line":14,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant Exponential.doubleScale (contracts/Exponential.sol#14) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"logic","component":"halfExpScale","confidence":"high","description":"Constant Exponential.halfExpScale (contracts/Exponential.sol#15) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"2539762bc5930343967e5d214d34c7adfa29c42d4d85012fe456bbd374e90a81","line":15,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant Exponential.halfExpScale (contracts/Exponential.sol#15) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"logic","component":"mantissaOne","confidence":"high","description":"Constant Exponential.mantissaOne (contracts/Exponential.sol#16) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"04e7829a4afb31b0d97dcb6d20c62314839493261554c8881319964312c26eef","line":16,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant Exponential.mantissaOne (contracts/Exponential.sol#16) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"other","component":"addExp","confidence":"medium","description":"Exponential.addExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#48-52) is never used and should be removed\n","end_line":52,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"7abd6f9704853c1eb8707fbd076f67a61365b6d7390a6ac16ae1f9ba544fccb0","line":48,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.addExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#48-52) is never used and should be removed"},{"class":"other","component":"subExp","confidence":"medium","description":"Exponential.subExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#57-61) is never used and should be removed\n","end_line":61,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"4b9435e1fb53d02dc907924b78e112fb8126fb7a8bc763bb28ace29af88b3614","line":57,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.subExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#57-61) is never used and should be removed"},{"class":"other","component":"divScalar","confidence":"medium","description":"Exponential.divScalar(Exponential.Exp,uint256) (contracts/Exponential.sol#102-109) is never used and should be removed\n","end_line":109,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"0a65a5cafdbdaedc7f0c8c105b6446082091903c76751d72ed05e197aa5abee3","line":102,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.divScalar(Exponential.Exp,uint256) (contracts/Exponential.sol#102-109) is never used and should be removed"},{"class":"other","component":"divScalarByExp","confidence":"medium","description":"Exponential.divScalarByExp(uint256,Exponential.Exp) (contracts/Exponential.sol#114-129) is never used and should be removed\n","end_line":129,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"cd0c0e1faf02b538733cb7d137c78fa833695d5ffe88c4b18bece776a9c61b2b","line":114,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.divScalarByExp(uint256,Exponential.Exp) (contracts/Exponential.sol#114-129) is never used and should be removed"},{"class":"other","component":"divScalarByExpTruncate","confidence":"medium","description":"Exponential.divScalarByExpTruncate(uint256,Exponential.Exp) (contracts/Exponential.sol#134-141) is never used and should be removed\n","end_line":141,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"b4a91fbe20b4a72271bbf9c38017e4bc5c1d8c613e68495d4cbf667416437cf6","line":134,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.divScalarByExpTruncate(uint256,Exponential.Exp) (contracts/Exponential.sol#134-141) is never used and should be removed"},{"class":"other","component":"mulExp","confidence":"medium","description":"Exponential.mulExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#146-166) is never used and should be removed\n","end_line":166,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"8b5653692cf9ab24155bd5720a30043956c84a86e0f950df5ffc6bbf911f40b7","line":146,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mulExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#146-166) is never used and should be removed"},{"class":"other","component":"mulExp","confidence":"medium","description":"Exponential.mulExp(uint256,uint256) (contracts/Exponential.sol#171-173) is never used and should be removed\n","end_line":173,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"a6a01b12c4829cf7fb0afc5d0c452c609eaa9be4180044ea2022140dfa301a1e","line":171,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mulExp(uint256,uint256) (contracts/Exponential.sol#171-173) is never used and should be removed"},{"class":"other","component":"mulExp3","confidence":"medium","description":"Exponential.mulExp3(Exponential.Exp,Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#178-184) is never used and should be removed\n","end_line":184,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"1dbd878fbad8bfade658bff8ef2062dcb04418f3700ada157084d8e4a0d37c0d","line":178,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mulExp3(Exponential.Exp,Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#178-184) is never used and should be removed"},{"class":"other","component":"divExp","confidence":"medium","description":"Exponential.divExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#191-193) is never used and should be removed\n","end_line":193,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"071e15ba25c005c104113847503a6430ac47d3a0aa0d8cfcbe1e558b78559c3a","line":191,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.divExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#191-193) is never used and should be removed"},{"class":"other","component":"lessThanExp","confidence":"medium","description":"Exponential.lessThanExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#207-209) is never used and should be removed\n","end_line":209,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"683219524e5c7a2a7aac23b9c050ff6a3322207f8852dd4dbb39903edc9ba79a","line":207,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.lessThanExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#207-209) is never used and should be removed"},{"class":"other","component":"lessThanOrEqualExp","confidence":"medium","description":"Exponential.lessThanOrEqualExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#214-216) is never used and should be removed\n","end_line":216,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"bdae35163675e0d0a73b0e4e4a4f20f0a40bf219ef48bced2174f8fcd3692344","line":214,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.lessThanOrEqualExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#214-216) is never used and should be removed"},{"class":"other","component":"greaterThanExp","confidence":"medium","description":"Exponential.greaterThanExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#221-223) is never used and should be removed\n","end_line":223,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"8af7ccfbf35ea1d8c3b7a44c13651f1e9fdfd53734d40d5c65a420c7a6f3eeab","line":221,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.greaterThanExp(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#221-223) is never used and should be removed"},{"class":"other","component":"isZeroExp","confidence":"medium","description":"Exponential.isZeroExp(Exponential.Exp) (contracts/Exponential.sol#228-230) is never used and should be removed\n","end_line":230,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"6a1924ec694962a86f82f11a883da9d5df69d8dbc7793f344c89ef50b3edee0e","line":228,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.isZeroExp(Exponential.Exp) (contracts/Exponential.sol#228-230) is never used and should be removed"},{"class":"other","component":"safe224","confidence":"medium","description":"Exponential.safe224(uint256,string) (contracts/Exponential.sol#232-235) is never used and should be removed\n","end_line":235,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"438d43a444c3bfde7a131f23a326f506d1892e4c164cee3d35a4ec26f1c7a052","line":232,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.safe224(uint256,string) (contracts/Exponential.sol#232-235) is never used and should be removed"},{"class":"other","component":"safe32","confidence":"medium","description":"Exponential.safe32(uint256,string) (contracts/Exponential.sol#237-240) is never used and should be removed\n","end_line":240,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"1295fbd6082dd471225cdebad76738260b396343cebc9e7bac80a128d1ca7e6c","line":237,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.safe32(uint256,string) (contracts/Exponential.sol#237-240) is never used and should be removed"},{"class":"other","component":"add_","confidence":"medium","description":"Exponential.add_(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#242-244) is never used and should be removed\n","end_line":244,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"e7b90f9fecaf005c3cfe848dacd9a716274f281931a1f3e027daf2723cc872c5","line":242,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.add_(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#242-244) is never used and should be removed"},{"class":"other","component":"add_","confidence":"medium","description":"Exponential.add_(Exponential.Double,Exponential.Double) (contracts/Exponential.sol#246-248) is never used and should be removed\n","end_line":248,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"3857d2986b3fe47532d2544f68e64c80271cbb72d1b2906c4a235bddde9c74f5","line":246,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.add_(Exponential.Double,Exponential.Double) (contracts/Exponential.sol#246-248) is never used and should be removed"},{"class":"other","component":"add_","confidence":"medium","description":"Exponential.add_(uint256,uint256) (contracts/Exponential.sol#250-252) is never used and should be removed\n","end_line":252,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"1cba07c506f9a47350993ccb82182e46a2622b50a77461cc1cbd6e57780cbc92","line":250,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.add_(uint256,uint256) (contracts/Exponential.sol#250-252) is never used and should be removed"},{"class":"other","component":"add_","confidence":"medium","description":"Exponential.add_(uint256,uint256,string) (contracts/Exponential.sol#254-258) is never used and should be removed\n","end_line":258,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"364f15c24fd09388bed814e39248879ce399c19bf706e01d33c8d06f62973057","line":254,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.add_(uint256,uint256,string) (contracts/Exponential.sol#254-258) is never used and should be removed"},{"class":"other","component":"sub_","confidence":"medium","description":"Exponential.sub_(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#260-262) is never used and should be removed\n","end_line":262,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"dec9e812b7a0684990724453e7c68149a86b973668fab226a2d19ca0583dbfbf","line":260,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.sub_(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#260-262) is never used and should be removed"},{"class":"other","component":"sub_","confidence":"medium","description":"Exponential.sub_(Exponential.Double,Exponential.Double) (contracts/Exponential.sol#264-266) is never used and should be removed\n","end_line":266,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"0fa2816ae6db136decdc47fcb900357bdd94229c308eb4d752a4c287fe7ba629","line":264,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.sub_(Exponential.Double,Exponential.Double) (contracts/Exponential.sol#264-266) is never used and should be removed"},{"class":"other","component":"sub_","confidence":"medium","description":"Exponential.sub_(uint256,uint256) (contracts/Exponential.sol#268-270) is never used and should be removed\n","end_line":270,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"ea7ed2869ba83f560b9736046913bbcc8331c33ac26b8abd084847ee44dd6a74","line":268,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.sub_(uint256,uint256) (contracts/Exponential.sol#268-270) is never used and should be removed"},{"class":"other","component":"sub_","confidence":"medium","description":"Exponential.sub_(uint256,uint256,string) (contracts/Exponential.sol#272-275) is never used and should be removed\n","end_line":275,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"b65988c5222953ef32e41024d272e6771f23c7b67e806dcd1738c421731b5e5c","line":272,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.sub_(uint256,uint256,string) (contracts/Exponential.sol#272-275) is never used and should be removed"},{"class":"other","component":"mul_","confidence":"medium","description":"Exponential.mul_(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#277-279) is never used and should be removed\n","end_line":279,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"64d043805b74be48fbde65d89f53d19c1ccdf7688fa7401240c27477fd584697","line":277,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mul_(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#277-279) is never used and should be removed"},{"class":"other","component":"mul_","confidence":"medium","description":"Exponential.mul_(Exponential.Exp,uint256) (contracts/Exponential.sol#281-283) is never used and should be removed\n","end_line":283,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"f207db8327257d5fa4c274a14866b1fadf62d421f56c05b9df903f3c9ff7a8d8","line":281,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mul_(Exponential.Exp,uint256) (contracts/Exponential.sol#281-283) is never used and should be removed"},{"class":"other","component":"mul_","confidence":"medium","description":"Exponential.mul_(uint256,Exponential.Exp) (contracts/Exponential.sol#285-287) is never used and should be removed\n","end_line":287,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"7d72f4ec24936576d79b121ede908df15969dd8eab235da92b865795dc4cf0e5","line":285,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mul_(uint256,Exponential.Exp) (contracts/Exponential.sol#285-287) is never used and should be removed"},{"class":"other","component":"mul_","confidence":"medium","description":"Exponential.mul_(Exponential.Double,Exponential.Double) (contracts/Exponential.sol#289-291) is never used and should be removed\n","end_line":291,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"68065b0a8cf0578659b8a4bc014cb910663eeb572756eb9c05c67ae29317ae5c","line":289,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mul_(Exponential.Double,Exponential.Double) (contracts/Exponential.sol#289-291) is never used and should be removed"},{"class":"other","component":"mul_","confidence":"medium","description":"Exponential.mul_(Exponential.Double,uint256) (contracts/Exponential.sol#293-295) is never used and should be removed\n","end_line":295,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"47ed5664ed01d5583b916af309b480efeb1ff2ddea3bfb838e41e66989d332d9","line":293,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mul_(Exponential.Double,uint256) (contracts/Exponential.sol#293-295) is never used and should be removed"},{"class":"other","component":"mul_","confidence":"medium","description":"Exponential.mul_(uint256,Exponential.Double) (contracts/Exponential.sol#297-299) is never used and should be removed\n","end_line":299,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"7a56b204bda24e614f50b7fc7541aaa48a7817bf6ea2e724da9b40f4ea999684","line":297,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mul_(uint256,Exponential.Double) (contracts/Exponential.sol#297-299) is never used and should be removed"},{"class":"other","component":"mul_","confidence":"medium","description":"Exponential.mul_(uint256,uint256) (contracts/Exponential.sol#301-303) is never used and should be removed\n","end_line":303,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"6980a62b4647005815d03f43015e78611128773d1f0fec7740e7ac545a3ecc4d","line":301,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mul_(uint256,uint256) (contracts/Exponential.sol#301-303) is never used and should be removed"},{"class":"other","component":"mul_","confidence":"medium","description":"Exponential.mul_(uint256,uint256,string) (contracts/Exponential.sol#305-312) is never used and should be removed\n","end_line":312,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"e4748e7d37ed041f272407ed9b0379d5cd1ce83c084f2472c0433dc61faef98a","line":305,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mul_(uint256,uint256,string) (contracts/Exponential.sol#305-312) is never used and should be removed"},{"class":"other","component":"div_","confidence":"medium","description":"Exponential.div_(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#314-316) is never used and should be removed\n","end_line":316,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"b6ef2bac74d5992e79260102ee9a9632a22a488b116a04c0d40d008a9d152d98","line":314,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.div_(Exponential.Exp,Exponential.Exp) (contracts/Exponential.sol#314-316) is never used and should be removed"},{"class":"other","component":"div_","confidence":"medium","description":"Exponential.div_(Exponential.Exp,uint256) (contracts/Exponential.sol#318-320) is never used and should be removed\n","end_line":320,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"ae26be5bd1260851a90c09263aa9f6c493dddc3590cc060ff6ce1491d836379b","line":318,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.div_(Exponential.Exp,uint256) (contracts/Exponential.sol#318-320) is never used and should be removed"},{"class":"other","component":"div_","confidence":"medium","description":"Exponential.div_(uint256,Exponential.Exp) (contracts/Exponential.sol#322-324) is never used and should be removed\n","end_line":324,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"8fc3799fe150aa6bbe645298db3686e21133973cc0d3557c1650179587aced00","line":322,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.div_(uint256,Exponential.Exp) (contracts/Exponential.sol#322-324) is never used and should be removed"},{"class":"other","component":"div_","confidence":"medium","description":"Exponential.div_(Exponential.Double,Exponential.Double) (contracts/Exponential.sol#326-328) is never used and should be removed\n","end_line":328,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"ff0894c4570223156fe21297227542f20774df8879d2cef995eba9aa3331efe9","line":326,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.div_(Exponential.Double,Exponential.Double) (contracts/Exponential.sol#326-328) is never used and should be removed"},{"class":"other","component":"div_","confidence":"medium","description":"Exponential.div_(Exponential.Double,uint256) (contracts/Exponential.sol#330-332) is never used and should be removed\n","end_line":332,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"5c97e653c491f7980df21926d7cf7b391fab3bce128b3069ba481a6f8b9d413b","line":330,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.div_(Exponential.Double,uint256) (contracts/Exponential.sol#330-332) is never used and should be removed"},{"class":"other","component":"div_","confidence":"medium","description":"Exponential.div_(uint256,Exponential.Double) (contracts/Exponential.sol#334-336) is never used and should be removed\n","end_line":336,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"3169555e6b8cf44b6a41caadaf7a6259d111ea0eb36362f9b1f128d7b87382a5","line":334,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.div_(uint256,Exponential.Double) (contracts/Exponential.sol#334-336) is never used and should be removed"},{"class":"other","component":"div_","confidence":"medium","description":"Exponential.div_(uint256,uint256) (contracts/Exponential.sol#338-340) is never used and should be removed\n","end_line":340,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"4c212ab47e4e699a1abaaa63554325df0e0a69865785ded62410d742a927899a","line":338,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.div_(uint256,uint256) (contracts/Exponential.sol#338-340) is never used and should be removed"},{"class":"other","component":"div_","confidence":"medium","description":"Exponential.div_(uint256,uint256,string) (contracts/Exponential.sol#342-345) is never used and should be removed\n","end_line":345,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"7e7666d2ed4bd804cc6d19225c52220df47661f4af89d4db3aeb6d47bdbc6a71","line":342,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.div_(uint256,uint256,string) (contracts/Exponential.sol#342-345) is never used and should be removed"},{"class":"other","component":"fraction","confidence":"medium","description":"Exponential.fraction(uint256,uint256) (contracts/Exponential.sol#347-349) is never used and should be removed\n","end_line":349,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Exponential.sol","id":"4cf8903036de66794ec80766faf1b3be197da4e1e82686a1fca543ea37d081bd","line":347,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.fraction(uint256,uint256) (contracts/Exponential.sol#347-349) is never used and should be removed"},{"class":"other","component":"NewPendingImplementation","confidence":"high","description":"Event Unitroller.NewPendingImplementation(address,address) (contracts/Unitroller.sol#15) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"fdb321b926ad453a7ae30d680dd7aec7c8cf5ef9330ecc66065e1071ef5a8623","line":15,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event Unitroller.NewPendingImplementation(address,address) (contracts/Unitroller.sol#15) has address parameters but no indexed parameters"},{"class":"other","component":"NewImplementation","confidence":"high","description":"Event Unitroller.NewImplementation(address,address) (contracts/Unitroller.sol#20) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"7cdfa491d566d83ce920545783bd60c42c0094528efb3e20b1490e14cc6bbec3","line":20,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event Unitroller.NewImplementation(address,address) (contracts/Unitroller.sol#20) has address parameters but no indexed parameters"},{"class":"other","component":"NewPendingAdmin","confidence":"high","description":"Event Unitroller.NewPendingAdmin(address,address) (contracts/Unitroller.sol#25) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"287a6787e2c681ec22fc6e02a73e17e10320133e14e3e3c4c51a5b315cea698f","line":25,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event Unitroller.NewPendingAdmin(address,address) (contracts/Unitroller.sol#25) has address parameters but no indexed parameters"},{"class":"other","component":"NewAdmin","confidence":"high","description":"Event Unitroller.NewAdmin(address,address) (contracts/Unitroller.sol#30) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"4553a5d0f45a7d7f6e8090909bf3bcbb1928e2574004fe50e8b95b79109b7a00","line":30,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event Unitroller.NewAdmin(address,address) (contracts/Unitroller.sol#30) has address parameters but no indexed parameters"},{"class":"logic","component":"_setPendingImplementation","confidence":"high","description":"Function Unitroller._setPendingImplementation(address) (contracts/Unitroller.sol#38-51) is not in mixedCase\n","end_line":51,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"89e5fc46a0c0c53e3b48d5af3fd7fa6cab9f6f9083f179c953af0fcfae67f0ae","line":38,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Unitroller._setPendingImplementation(address) (contracts/Unitroller.sol#38-51) is not in mixedCase"},{"class":"logic","component":"_acceptImplementation","confidence":"high","description":"Function Unitroller._acceptImplementation() (contracts/Unitroller.sol#58-76) is not in mixedCase\n","end_line":76,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"6023554651adfc37b03a2fde8ed30fd41e6df4d6233cc2abec6f1e2571f1a028","line":58,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Unitroller._acceptImplementation() (contracts/Unitroller.sol#58-76) is not in mixedCase"},{"class":"logic","component":"_setPendingAdmin","confidence":"high","description":"Function Unitroller._setPendingAdmin(address) (contracts/Unitroller.sol#85-101) is not in mixedCase\n","end_line":101,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"2833986fc3c69750f61e0fd196bb80a3fcc2246c5b0f3e4b564e0566bce83958","line":85,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Unitroller._setPendingAdmin(address) (contracts/Unitroller.sol#85-101) is not in mixedCase"},{"class":"logic","component":"_acceptAdmin","confidence":"high","description":"Function Unitroller._acceptAdmin() (contracts/Unitroller.sol#108-128) is not in mixedCase\n","end_line":128,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"20c5cd255d8d94ce1ed86238f63c032e2c9472719035db6f9efd4e4a745803c5","line":108,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Unitroller._acceptAdmin() (contracts/Unitroller.sol#108-128) is not in mixedCase"},{"class":"logic","component":"fallback","confidence":"high","description":"Unitroller.fallback() (contracts/Unitroller.sol#135-147) uses assembly\n\t- INLINE ASM (contracts/Unitroller.sol#139-146)\n","end_line":147,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"a873a2c6b69f58a7e6bc4dff6b81e80f7ae3e331da66152f14e6c7317cb6e736","line":135,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#assembly"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:assembly","severity":"informational","source":"slither","title":"Unitroller.fallback() (contracts/Unitroller.sol#135-147) uses assembly"},{"class":"unchecked-call","component":"fallback","confidence":"high","description":"Low level call in Unitroller.fallback() (contracts/Unitroller.sol#135-147):\n\t- (success,None) = comptrollerImplementation.delegatecall(msg.data) (contracts/Unitroller.sol#137)\n","end_line":147,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"contracts/Unitroller.sol","id":"237366cf472191a40d1d00725695269ff711af33aebee2f91b45be6c7ee7c080","line":135,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#low-level-calls"],"remediation":"Check the boolean return of low-level call/delegatecall/send and revert on failure with a descriptive reason string.","rule_id":"slither:low-level-calls","severity":"informational","source":"slither","title":"Low level call in Unitroller.fallback() (contracts/Unitroller.sol#135-147):"}],"limitations":["VegaSec runs static analysis only. Findings can include false positives, miss patterns the configured detectors do not cover, and never replace manual auditor judgement.","Scan ran slither and semgrep against a multi-file sandboxed bundle of 12 Solidity file(s). Imports resolve between the bundled files; dependencies outside the bundle (an npm package, another repo, a generated file) are NOT analyzed, and an unresolved import makes the run partial rather than clean.","Some detectors emitted warnings (see `warnings`); their output was still ingested but should be read with extra care.","This report is not a certification, audit attestation, or financial advice."],"warnings":["Unmapped detector slither:erc20-interface — classified as 'other'","Unmapped detector slither:events-maths — classified as 'other'","Unmapped detector slither:dead-code — classified as 'other'","Unmapped detector slither:unimplemented-functions — classified as 'other'","Unmapped detector slither:unindexed-event-address — classified as 'other'"]},"canonical_version":"vss-canonical-1","coverage_status":"complete","final_score":0,"findings_count":138,"generated_at":"2026-10-04T00:36:48.799Z","id":"VSS-20261004-S7XEDXZJ","severity_counts":{"critical":0,"high":2,"informational":104,"low":10,"medium":22},"source_filename":"Unitroller.sol","source_hash":"4463d2ca6829f3a838f3d9b3cf4d15860072dbaa1c5f1f0c4f5aa0787d6b9863","surface":"solidity","warnings_count":5}