{"analyzer_versions":{"semgrep":"1.163.0"},"body":{"audit_stages":[{"blockers":[],"completed_at":"2026-10-04T00:37:11.570Z","description":"Normalize the submitted contract target and confirm it can enter the Solidity audit lane.","elapsed_ms":320,"id":"intake","label":"Audit intake","limitations":[],"next_step":"Acquire verified source or scan the pasted Solidity source.","order":1,"status":"passed"},{"blockers":[],"completed_at":"2026-10-04T00:37:11.570Z","description":"Resolve pasted source or verified explorer source without treating malformed input as demo data.","elapsed_ms":1450,"id":"source_acquisition","label":"Source acquisition","limitations":[],"next_step":"Validate the analyzer toolchain against the acquired source.","order":2,"status":"passed"},{"blockers":[],"completed_at":"2026-10-04T00:37:11.570Z","description":"Confirm the configured static analyzers can run and produce parseable output.","elapsed_ms":2300,"id":"toolchain_validation","label":"Toolchain validation","limitations":["One or more analyzers emitted warnings; report findings remain usable but should be read with limitations."],"next_step":"Run static analysis and capture raw detector evidence.","order":3,"status":"partial"},{"blockers":[],"completed_at":"2026-10-04T00:37:11.570Z","description":"Run static analyzers against the sandboxed source and collect raw detector evidence.","elapsed_ms":8800,"findings_count":84,"id":"static_analysis","label":"Static analysis","limitations":["One or more analyzers emitted warnings; report findings remain usable but should be read with limitations."],"next_step":"Normalize detector output into one deduped finding set.","order":4,"status":"partial"},{"blockers":[],"completed_at":"2026-10-04T00:37:11.570Z","description":"Dedupe detectors, classify vulnerability classes and compute severity-weighted risk.","elapsed_ms":1150,"findings_count":84,"id":"finding_normalization","label":"Finding normalization","limitations":[],"next_step":"Review exploitability conservatively against confidence and limitations.","order":5,"status":"passed"},{"blockers":[],"completed_at":"2026-10-04T00:37:11.570Z","description":"Frame automated findings with conservative exploitability and limitation notes.","elapsed_ms":1900,"findings_count":84,"id":"exploitability_review","label":"Exploitability review","limitations":["Automated exploitability review is conservative and does not replace a manual exploitability assessment."],"next_step":"Draft remediation notes from the normalized evidence.","order":6,"status":"partial"},{"blockers":[],"completed_at":"2026-10-04T00:37:11.570Z","description":"Prepare remediation-oriented evidence for the shareable report artifact.","elapsed_ms":1500,"findings_count":84,"id":"remediation_draft","label":"Remediation draft","limitations":["Remediation notes are generated from detector evidence and require project-specific engineering review."],"next_step":"Attach an operator review artifact before claiming human review.","order":7,"status":"partial"},{"blockers":["No operator review artifact is attached to this automated scan."],"completed_at":"2026-10-04T00:37:11.570Z","description":"Record whether a human operator artifact exists before buyer escalation.","elapsed_ms":0,"id":"operator_review","label":"Operator review","limitations":["Human operator review has not been attached to this automated scan yet."],"next_step":"Attach a real operator review artifact before claiming human review.","order":8,"status":"blocked"},{"artifact":{"created_at":"2026-10-04T00:37:11.570Z","id":"solidity-2f746d702f766567","label":"Automated Solidity report","type":"report"},"blockers":[],"completed_at":"2026-10-04T00:37:11.570Z","description":"Publish the automated report artifact or explain why the scan failed closed.","elapsed_ms":620,"findings_count":84,"id":"finalization","label":"Finalization","limitations":["Final report is an automated static-analysis artifact; no operator review artifact is attached."],"next_step":"Share the report with explicit limitations and review state.","order":9,"status":"partial"}],"counts":{"access-control":4,"centralization":0,"flash-loan":0,"front-running":0,"gas-dos":0,"logic":32,"math-overflow":0,"oracle-manipulation":0,"other":35,"reentrancy":7,"timestamp-dependence":0,"unchecked-call":1,"uninitialized":5},"executive_summary":["84 findings surfaced (0 critical, 1 high, 23 medium, 8 low, 52 informational).","HIGH · Unitroller.fallback() (Unitroller.sol#2586-2599) uses delegatecall to a input-controlled function id (fallback) — exploitability medium.","Automated static analysis only. A human operator review has not been attached to this report."],"findings":[{"class":"access-control","component":"fallback","confidence":"medium","description":"Unitroller.fallback() (Unitroller.sol#2586-2599) uses delegatecall to a input-controlled function id\n\t- (success,None) = comptrollerImplementation.delegatecall(msg.data) (Unitroller.sol#2588)\n","end_line":2599,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"47714bc3f62d1dc1657d68c427f75a5c8f7159e7b1453344d0278f8ed4c93fb0","line":2586,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#controlled-delegatecall"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:controlled-delegatecall","severity":"high","source":"slither","title":"Unitroller.fallback() (Unitroller.sol#2586-2599) uses delegatecall to a input-controlled function id"},{"class":"logic","component":"mulUInt","confidence":"high","description":"CarefulMath.mulUInt(uint256,uint256) (Unitroller.sol#311-323) uses a dangerous strict equality:\n\t- a == 0 (Unitroller.sol#312)\n","end_line":323,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"c58aa21c96043e1138a136fa5121c5b0e20e5fbf2b345eeae5a37877d9af6cfc","line":311,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CarefulMath.mulUInt(uint256,uint256) (Unitroller.sol#311-323) uses a dangerous strict equality:"},{"class":"logic","component":"divUInt","confidence":"high","description":"CarefulMath.divUInt(uint256,uint256) (Unitroller.sol#328-334) uses a dangerous strict equality:\n\t- b == 0 (Unitroller.sol#329)\n","end_line":334,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"621c896ac1a4a55914cfb05d283c1959f768894e80de14c4ff027955bc971af2","line":328,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CarefulMath.divUInt(uint256,uint256) (Unitroller.sol#328-334) uses a dangerous strict equality:"},{"class":"logic","component":"mulExp","confidence":"high","description":"Exponential.mulExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#515-535) uses a dangerous strict equality:\n\t- assert(bool)(err2 == MathError.NO_ERROR) (Unitroller.sol#532)\n","end_line":535,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"5d3e639e66230f1dc4c819d7a2b1784a3331c76d6068b0a08c56443012711a7c","line":515,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"Exponential.mulExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#515-535) uses a dangerous strict equality:"},{"class":"other","component":"EIP20NonStandardInterface","confidence":"high","description":"EIP20NonStandardInterface (Unitroller.sol#666-728) has incorrect ERC20 function interface:EIP20NonStandardInterface.transferFrom(address,address,uint256) (Unitroller.sol#706)\n","end_line":728,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"470160b8998b07d1718bb884be18143453560a4112acfbe54e7b9d91375c4801","line":666,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#erc20-interface"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:erc20-interface","severity":"medium","source":"slither","title":"EIP20NonStandardInterface (Unitroller.sol#666-728) has incorrect ERC20 function interface:EIP20NonStandardInterface.transferFrom(address,address,uint256) (Unitr"},{"class":"logic","component":"constructor","confidence":"high","description":"CToken.constructor(ComptrollerInterface,InterestRateModel,uint256,string,string,uint256) (Unitroller.sol#1000-1028) uses a dangerous strict equality:\n\t- require(bool,string)(err == uint256(Error.NO_ERROR),Setting interest rate model failed) (Unitroller.sol#1023)\n","end_line":1028,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"0c39f7a11bd6b0730a69feece7c184d1404efe811ff8b8e1e6c8fd92a1a4a782","line":1000,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.constructor(ComptrollerInterface,InterestRateModel,uint256,string,string,uint256) (Unitroller.sol#1000-1028) uses a dangerous strict equality:"},{"class":"logic","component":"transfer","confidence":"high","description":"CToken.transfer(address,uint256) (Unitroller.sol#1107-1109) uses a dangerous strict equality:\n\t- transferTokens(msg.sender,msg.sender,dst,amount) == uint256(Error.NO_ERROR) (Unitroller.sol#1108)\n","end_line":1109,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"51424ac06037bf29dbbdc3805d99e57763fabc19c68c1b5085fd374aa822d0a8","line":1107,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.transfer(address,uint256) (Unitroller.sol#1107-1109) uses a dangerous strict equality:"},{"class":"logic","component":"transferFrom","confidence":"high","description":"CToken.transferFrom(address,address,uint256) (Unitroller.sol#1118-1120) uses a dangerous strict equality:\n\t- transferTokens(msg.sender,src,dst,amount) == uint256(Error.NO_ERROR) (Unitroller.sol#1119)\n","end_line":1120,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"466be0c856872b54b8bf12cc5d32bfa16020fae8a4b1d446ceede0062383e9d3","line":1118,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.transferFrom(address,address,uint256) (Unitroller.sol#1118-1120) uses a dangerous strict equality:"},{"class":"logic","component":"balanceOfUnderlying","confidence":"high","description":"CToken.balanceOfUnderlying(address) (Unitroller.sol#1162-1167) uses a dangerous strict equality:\n\t- require(bool)(mErr == MathError.NO_ERROR) (Unitroller.sol#1165)\n","end_line":1167,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"a5f5f07422ae14f74fc24263bff9ebf89fdf08d73dc74ff13eb399ec1b8c1a00","line":1162,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.balanceOfUnderlying(address) (Unitroller.sol#1162-1167) uses a dangerous strict equality:"},{"class":"logic","component":"supplyRatePerBlock","confidence":"high","description":"CToken.supplyRatePerBlock() (Unitroller.sol#1217-1241) uses a dangerous strict equality:\n\t- require(bool,string)(e1 == MathError.NO_ERROR,supplyRatePerBlock: calculating underlying failed) (Unitroller.sol#1229)\n","end_line":1241,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"3a8b64ee09e7e8853bfc1fac1e3717507dc85b56256bc31ee870d1dc4cbac64e","line":1217,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.supplyRatePerBlock() (Unitroller.sol#1217-1241) uses a dangerous strict equality:"},{"class":"logic","component":"borrowBalanceStored","confidence":"high","description":"CToken.borrowBalanceStored(address) (Unitroller.sol#1267-1271) uses a dangerous strict equality:\n\t- require(bool,string)(err == MathError.NO_ERROR,borrowBalanceStored: borrowBalanceStoredInternal failed) (Unitroller.sol#1269)\n","end_line":1271,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"ad74e062fc82f781ebcfcd418eb94fae3e8f63cc21568f192f707f06bf1dad64","line":1267,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.borrowBalanceStored(address) (Unitroller.sol#1267-1271) uses a dangerous strict equality:"},{"class":"logic","component":"exchangeRateStored","confidence":"high","description":"CToken.exchangeRateStored() (Unitroller.sol#1324-1328) uses a dangerous strict equality:\n\t- require(bool,string)(err == MathError.NO_ERROR,exchangeRateStored: exchangeRateStoredInternal failed) (Unitroller.sol#1326)\n","end_line":1328,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"7873f2c074712af7d64e6cad5efe85a06e900230c4200cc86923b336bd00aae9","line":1324,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.exchangeRateStored() (Unitroller.sol#1324-1328) uses a dangerous strict equality:"},{"class":"logic","component":"exchangeRateStoredInternal","confidence":"high","description":"CToken.exchangeRateStoredInternal() (Unitroller.sol#1335-1364) uses a dangerous strict equality:\n\t- totalSupply == 0 (Unitroller.sol#1336)\n","end_line":1364,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"e5cb00eadea83a14bccaadc8380b2c84749be92faee2e6c306a9f18e2accd6e7","line":1335,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.exchangeRateStoredInternal() (Unitroller.sol#1335-1364) uses a dangerous strict equality:"},{"class":"logic","component":"accrueInterest","confidence":"high","description":"CToken.accrueInterest() (Unitroller.sol#1394-1458) uses a dangerous strict equality:\n\t- assert(bool)(vars.mathErr == MathError.NO_ERROR) (Unitroller.sol#1409)\n","end_line":1458,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"21c8514a55dbfa5c0e1cd696d3a438fe48850b9f6b712bd614f0ea5fb98cc78a","line":1394,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.accrueInterest() (Unitroller.sol#1394-1458) uses a dangerous strict equality:"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.accrueInterest().vars (Unitroller.sol#1395) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"6ea66fb7f3767aa2397d0eef2bf80971a455e46b02ce8b0dd293fc1d85d152cd","line":1395,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.accrueInterest().vars (Unitroller.sol#1395) is a local variable never initialized"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.mintFresh(address,uint256).vars (Unitroller.sol#1504) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"5aa49507ce252bdf2e518a43ba1ec0903ffcc22ec9a90ee9e05783f0b41fb2f2","line":1504,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.mintFresh(address,uint256).vars (Unitroller.sol#1504) is a local variable never initialized"},{"class":"logic","component":"redeemFresh","confidence":"high","description":"CToken.redeemFresh(address,uint256,uint256) (Unitroller.sol#1621-1717) uses a dangerous strict equality:\n\t- require(bool,string)(vars.err == Error.NO_ERROR,redeem transfer out failed) (Unitroller.sol#1703)\n","end_line":1717,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"d02fc4b8c5b0d6e0e2a9f88a480c88f0ba9bfdb10992c536aef1bf3628eb7736","line":1621,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.redeemFresh(address,uint256,uint256) (Unitroller.sol#1621-1717) uses a dangerous strict equality:"},{"class":"reentrancy","component":"redeemFresh","confidence":"medium","description":"Reentrancy in CToken.redeemFresh(address,uint256,uint256) (Unitroller.sol#1621-1717):\n\tExternal calls:\n\t- allowed = comptroller.redeemAllowed(address(this),redeemer,vars.redeemTokens) (Unitroller.sol#1661)\n\tState variables written after the call(s):\n\t- totalSupply = vars.totalSupplyNew (Unitroller.sol#1706)\n\tCToken.totalSupply (Unitroller.sol#897) can be used in cross function reentrancies:\n\t- CToken.exchangeRateStoredInternal() (Unitroller.sol#1335-1364)\n\t- CToken.supplyRatePerBlock() (Unitroller.sol#1217-1241)\n\t- CToken.totalSupply (Unitroller.sol#897)\n","end_line":1717,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"d22b8033a04044e1fec23a78e74fa43e56c27e4480f5b03c6a05b8d63dda7648","line":1621,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-no-eth"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-no-eth","severity":"medium","source":"slither","title":"Reentrancy in CToken.redeemFresh(address,uint256,uint256) (Unitroller.sol#1621-1717):"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.redeemFresh(address,uint256,uint256).vars (Unitroller.sol#1624) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"0e6013ae9f6b6aff463d84aa42918c7e5bdea7ca10adb933399a5c0e1e594918","line":1624,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.redeemFresh(address,uint256,uint256).vars (Unitroller.sol#1624) is a local variable never initialized"},{"class":"logic","component":"borrowFresh","confidence":"high","description":"CToken.borrowFresh(address,uint256) (Unitroller.sol#1747-1812) uses a dangerous strict equality:\n\t- require(bool,string)(vars.err == Error.NO_ERROR,borrow transfer out failed) (Unitroller.sol#1798)\n","end_line":1812,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"e80f8eb2e0c36ec76685d7d4ad80d771d84d478b8f3443c8e69fa3e7e2d1873e","line":1747,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.borrowFresh(address,uint256) (Unitroller.sol#1747-1812) uses a dangerous strict equality:"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.borrowFresh(address,uint256).vars (Unitroller.sol#1764) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"dfaba343324115e9f2167fca3e0f76ff12f0cbcd64908e7e12f014eb7eee39a3","line":1764,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.borrowFresh(address,uint256).vars (Unitroller.sol#1764) is a local variable never initialized"},{"class":"logic","component":"repayBorrowFresh","confidence":"high","description":"CToken.repayBorrowFresh(address,address,uint256) (Unitroller.sol#1862-1939) uses a dangerous strict equality:\n\t- require(bool,string)(vars.err == Error.NO_ERROR,repay borrow transfer in failed) (Unitroller.sol#1925)\n","end_line":1939,"exploitability":"low","exploitability_note":"Low-severity finding even at higher confidence; unlikely to be directly exploitable.","file":"Unitroller.sol","id":"d1c99438d1e1811698369b7ce050398d9192c922c66bc69aa650bc523d110930","line":1862,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#incorrect-equality"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:incorrect-equality","severity":"medium","source":"slither","title":"CToken.repayBorrowFresh(address,address,uint256) (Unitroller.sol#1862-1939) uses a dangerous strict equality:"},{"class":"uninitialized","component":"vars","confidence":"medium","description":"CToken.repayBorrowFresh(address,address,uint256).vars (Unitroller.sol#1874) is a local variable never initialized\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"e71d79a6f3c49afd6c2f7ac29fb029ab8711b3280728ee65b2bd9cf38595ddf2","line":1874,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#uninitialized-local"],"remediation":"Initialize storage variables explicitly in the constructor/initializer; for upgradeable contracts call the initializer through a tested pattern.","rule_id":"slither:uninitialized-local","severity":"medium","source":"slither","title":"CToken.repayBorrowFresh(address,address,uint256).vars (Unitroller.sol#1874) is a local variable never initialized"},{"class":"reentrancy","component":"liquidateBorrowInternal","confidence":"medium","description":"Reentrancy in CToken.liquidateBorrowInternal(address,uint256,CToken) (Unitroller.sol#1949-1964):\n\tExternal calls:\n\t- error = cTokenCollateral.accrueInterest() (Unitroller.sol#1956)\n\t- liquidateBorrowFresh(msg.sender,borrower,repayAmount,cTokenCollateral) (Unitroller.sol#1963)\n\t\t- allowed = comptroller.repayBorrowAllowed(address(this),payer,borrower,repayAmount) (Unitroller.sol#1864)\n\t\t- allowed = comptroller.liquidateBorrowAllowed(address(this),address(cTokenCollateral),liquidator,borrower,repayAmount) (Unitroller.sol#1977)\n\t\t- seizeError = cTokenCollateral.seize(liquidator,borrower,seizeTokens) (Unitroller.sol#2025)\n\t\t- comptroller.liquidateBorrowVerify(address(this),address(cTokenCollateral),liquidator,borrower,repayAmount,seizeTokens) (Unitroller.sol#2032)\n\t\t- comptroller.repayBorrowVerify(address(this),payer,borrower,vars.repayAmount,vars.borrowerIndex) (Unitroller.sol#1936)\n\tState variables written after the call(s):\n\t- liquidateBorrowFresh(msg.sender,borrower,repayAmount,cTokenCollateral) (Unitroller.sol#1963)\n\t\t- totalBorrows = vars.totalBorrowsNew (Unitroller.sol#1930)\n\tCToken.totalBorrows (Unitroller.sol#887) can be used in cross function reentrancies:\n\t- CToken.accrueInterest() (Unitroller.sol#1394-1458)\n\t- CToken.borrowRatePerBlock() (Unitroller.sol#1207-1211)\n\t- CToken.exchangeRateStoredInternal() (Unitroller.sol#1335-1364)\n\t- CToken.supplyRatePerBlock() (Unitroller.sol#1217-1241)\n\t- CToken.totalBorrows (Unitroller.sol#887)\n","end_line":1964,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"c2b2edf6cd116438bd83e93bf79908b5753d5a4c4954b9035f0028abfd4eeff7","line":1949,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-no-eth"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-no-eth","severity":"medium","source":"slither","title":"Reentrancy in CToken.liquidateBorrowInternal(address,uint256,CToken) (Unitroller.sol#1949-1964):"},{"class":"reentrancy","component":"mintFresh","confidence":"medium","description":"Reentrancy in CToken.mintFresh(address,uint256) (Unitroller.sol#1492-1569):\n\tExternal calls:\n\t- allowed = comptroller.mintAllowed(address(this),minter,mintAmount) (Unitroller.sol#1494)\n\tEvent emitted after the call(s):\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(Error.MARKET_NOT_FRESH,FailureInfo.MINT_FRESHNESS_CHECK) (Unitroller.sol#1501)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1538)\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(vars.err,FailureInfo.MINT_TRANSFER_IN_NOT_POSSIBLE) (Unitroller.sol#1509)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.MINT_EXCHANGE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1523)\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(vars.err,FailureInfo.MINT_TRANSFER_IN_FAILED) (Unitroller.sol#1554)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.MINT_COMPTROLLER_REJECTION,allowed) (Unitroller.sol#1496)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1533)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.MINT_EXCHANGE_RATE_READ_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1518)\n\t- Mint(minter,mintAmount,vars.mintTokens) (Unitroller.sol#1562)\n\t- Transfer(address(this),minter,vars.mintTokens) (Unitroller.sol#1563)\n","end_line":1569,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"36e06241be2cf8cc8c110f87f2dfa09bf2216b4763bfd31debd0813cbc78fd26","line":1492,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.mintFresh(address,uint256) (Unitroller.sol#1492-1569):"},{"class":"reentrancy","component":"redeemFresh","confidence":"medium","description":"Reentrancy in CToken.redeemFresh(address,uint256,uint256) (Unitroller.sol#1621-1717):\n\tExternal calls:\n\t- allowed = comptroller.redeemAllowed(address(this),redeemer,vars.redeemTokens) (Unitroller.sol#1661)\n\tEvent emitted after the call(s):\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1683)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1678)\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(Error.TOKEN_INSUFFICIENT_CASH,FailureInfo.REDEEM_TRANSFER_OUT_NOT_POSSIBLE) (Unitroller.sol#1688)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.REDEEM_COMPTROLLER_REJECTION,allowed) (Unitroller.sol#1663)\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(Error.MARKET_NOT_FRESH,FailureInfo.REDEEM_FRESHNESS_CHECK) (Unitroller.sol#1668)\n\t- Redeem(redeemer,vars.redeemAmount,vars.redeemTokens) (Unitroller.sol#1711)\n\t- Transfer(redeemer,address(this),vars.redeemTokens) (Unitroller.sol#1710)\n","end_line":1717,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"736e6e6e1edd5c2dc48f647d4ffb1efbad61a01ff966c1aaaa1d12269913431c","line":1621,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.redeemFresh(address,uint256,uint256) (Unitroller.sol#1621-1717):"},{"class":"reentrancy","component":"borrowFresh","confidence":"medium","description":"Reentrancy in CToken.borrowFresh(address,uint256) (Unitroller.sol#1747-1812):\n\tExternal calls:\n\t- allowed = comptroller.borrowAllowed(address(this),borrower,borrowAmount) (Unitroller.sol#1749)\n\tEvent emitted after the call(s):\n\t- Borrow(borrower,borrowAmount,vars.accountBorrowsNew,vars.totalBorrowsNew) (Unitroller.sol#1806)\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(Error.MARKET_NOT_FRESH,FailureInfo.BORROW_FRESHNESS_CHECK) (Unitroller.sol#1756)\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(Error.TOKEN_INSUFFICIENT_CASH,FailureInfo.BORROW_CASH_NOT_AVAILABLE) (Unitroller.sol#1761)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1773)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1778)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1783)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.BORROW_COMPTROLLER_REJECTION,allowed) (Unitroller.sol#1751)\n","end_line":1812,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"645dee8a43014be329f77b398a54d31ac19b25f65e58222ea5e6cf333a3ce26f","line":1747,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.borrowFresh(address,uint256) (Unitroller.sol#1747-1812):"},{"class":"reentrancy","component":"repayBorrowFresh","confidence":"medium","description":"Reentrancy in CToken.repayBorrowFresh(address,address,uint256) (Unitroller.sol#1862-1939):\n\tExternal calls:\n\t- allowed = comptroller.repayBorrowAllowed(address(this),payer,borrower,repayAmount) (Unitroller.sol#1864)\n\tEvent emitted after the call(s):\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.COMPTROLLER_REJECTION,FailureInfo.REPAY_BORROW_COMPTROLLER_REJECTION,allowed) (Unitroller.sol#1866)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1882)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1905)\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(vars.err,FailureInfo.REPAY_BORROW_TRANSFER_IN_NOT_POSSIBLE) (Unitroller.sol#1895)\n\t- Failure(uint256(err),uint256(info),0) (Unitroller.sol#193)\n\t\t- fail(Error.MARKET_NOT_FRESH,FailureInfo.REPAY_BORROW_FRESHNESS_CHECK) (Unitroller.sol#1871)\n\t- Failure(uint256(err),uint256(info),opaqueError) (Unitroller.sol#202)\n\t\t- failOpaque(Error.MATH_ERROR,FailureInfo.REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,uint256(vars.mathErr)) (Unitroller.sol#1910)\n\t- RepayBorrow(payer,borrower,vars.repayAmount,vars.accountBorrowsNew,vars.totalBorrowsNew) (Unitroller.sol#1933)\n","end_line":1939,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"45b19100b6e9acb3457dec84e098bb008e610d0c525a7d5e79425c39bf0d1de0","line":1862,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.repayBorrowFresh(address,address,uint256) (Unitroller.sol#1862-1939):"},{"class":"reentrancy","component":"liquidateBorrowFresh","confidence":"medium","description":"Reentrancy in CToken.liquidateBorrowFresh(address,address,uint256,CToken) (Unitroller.sol#1975-2035):\n\tExternal calls:\n\t- allowed = comptroller.liquidateBorrowAllowed(address(this),address(cTokenCollateral),liquidator,borrower,repayAmount) (Unitroller.sol#1977)\n\t- repayBorrowError = repayBorrowFresh(liquidator,borrower,repayAmount) (Unitroller.sol#2019)\n\t\t- allowed = comptroller.repayBorrowAllowed(address(this),payer,borrower,repayAmount) (Unitroller.sol#1864)\n\t\t- comptroller.repayBorrowVerify(address(this),payer,borrower,vars.repayAmount,vars.borrowerIndex) (Unitroller.sol#1936)\n\t- seizeError = cTokenCollateral.seize(liquidator,borrower,seizeTokens) (Unitroller.sol#2025)\n\tEvent emitted after the call(s):\n\t- LiquidateBorrow(liquidator,borrower,repayAmount,address(cTokenCollateral),seizeTokens) (Unitroller.sol#2029)\n","end_line":2035,"exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"091d29eaaf2ebd7487583cb7da87907ea1bed6295488a100b471e83178ab6186","line":1975,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#reentrancy-events"],"remediation":"Apply the checks-effects-interactions pattern. State writes must happen before external calls, and consider OpenZeppelin's ReentrancyGuard for high-risk entry points.","rule_id":"slither:reentrancy-events","severity":"low","source":"slither","title":"Reentrancy in CToken.liquidateBorrowFresh(address,address,uint256,CToken) (Unitroller.sol#1975-2035):"},{"class":"access-control","component":"newPendingAdmin","confidence":"medium","description":"CToken._setPendingAdmin(address).newPendingAdmin (Unitroller.sol#2105) lacks a zero-check on :\n\t\t- pendingAdmin = newPendingAdmin (Unitroller.sol#2115)\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"941f724f427e1646501785c5d582804454cdf1eb57e5fcabdef0ffea5e6101fa","line":2105,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#missing-zero-check"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:missing-zero-check","severity":"low","source":"slither","title":"CToken._setPendingAdmin(address).newPendingAdmin (Unitroller.sol#2105) lacks a zero-check on :"},{"class":"access-control","component":"newPendingImplementation","confidence":"medium","description":"Unitroller._setPendingImplementation(address).newPendingImplementation (Unitroller.sol#2487) lacks a zero-check on :\n\t\t- pendingComptrollerImplementation = newPendingImplementation (Unitroller.sol#2495)\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"6fd6dae13ac56f7f57c1718d776a31fd0a58cb923e711e7f5d0524b62479991d","line":2487,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#missing-zero-check"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:missing-zero-check","severity":"low","source":"slither","title":"Unitroller._setPendingImplementation(address).newPendingImplementation (Unitroller.sol#2487) lacks a zero-check on :"},{"class":"access-control","component":"newPendingAdmin","confidence":"medium","description":"Unitroller._setPendingAdmin(address).newPendingAdmin (Unitroller.sol#2536) lacks a zero-check on :\n\t\t- pendingAdmin = newPendingAdmin (Unitroller.sol#2546)\n","exploitability":"medium","exploitability_note":"Medium-confidence detection; manual review required before relying on the finding either way.","file":"Unitroller.sol","id":"589a6deed6a6f983f9249461cb3b4ea2deff9497c381ac7cf70246c1f449fa8a","line":2536,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#missing-zero-check"],"remediation":"Gate privileged functions behind a tested role/ownership pattern (e.g. OpenZeppelin Ownable/AccessControl). Avoid tx.origin for authorization.","rule_id":"slither:missing-zero-check","severity":"low","source":"slither","title":"Unitroller._setPendingAdmin(address).newPendingAdmin (Unitroller.sol#2536) lacks a zero-check on :"},{"class":"logic","component":"^0.5.8","confidence":"high","description":"Version constraint ^0.5.8 contains known severe issues (https://solidity.readthedocs.io/en/latest/bugs.html)\n\t- AbiReencodingHeadOverflowWithStaticArrayCleanup\n\t- DirtyBytesArrayToStorage\n\t- NestedCalldataArrayAbiReencodingSizeValidation\n\t- ABIDecodeTwoDimensionalArrayMemory\n\t- KeccakCaching\n\t- EmptyByteArrayCopy\n\t- DynamicArrayCleanup\n\t- ImplicitConstructorCallvalueCheck\n\t- TupleAssignmentMultiStackSlotComponents\n\t- MemoryArrayCreationOverflow\n\t- privateCanBeOverridden\n\t- YulOptimizerRedundantAssignmentBreakContinue0.5\n\t- ABIEncoderV2CalldataStructsWithStaticallySizedAndDynamicallyEncodedMembers\n\t- SignedArrayStorageCopy\n\t- ABIEncoderV2StorageArrayWithMultiSlotElement\n\t- DynamicConstructorArgumentsClippedABIV2.\nIt is used by:\n\t- ^0.5.8 (Unitroller.sol#3)\n\t- ^0.5.8 (Unitroller.sol#210)\n\t- ^0.5.8 (Unitroller.sol#288)\n\t- ^0.5.8 (Unitroller.sol#376)\n\t- ^0.5.8 (Unitroller.sol#597)\n\t- ^0.5.8 (Unitroller.sol#659)\n\t- ^0.5.8 (Unitroller.sol#732)\n\t- ^0.5.8 (Unitroller.sol#767)\n\t- ^0.5.8 (Unitroller.sol#799)\n\t- ^0.5.8 (Unitroller.sol#2373)\n\t- ^0.5.8 (Unitroller.sol#2393)\n\t- ^0.5.8 (Unitroller.sol#2450)\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"be08e751a45e118955f9f856c1bc61dcc4c013d0bfb046a48d80897b9e151303","line":3,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#solc-version"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:solc-version","severity":"informational","source":"slither","title":"Version constraint ^0.5.8 contains known severe issues (https://solidity.readthedocs.io/en/latest/bugs.html)"},{"class":"other","component":"failOpaque","confidence":"medium","description":"ComptrollerErrorReporter.failOpaque(ComptrollerErrorReporter.Error,ComptrollerErrorReporter.FailureInfo,uint256) (Unitroller.sol#68-72) is never used and should be removed\n","end_line":72,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"660b0e733d23ee2d3293abad997a2081bbb5f8bbea27169d625a2151b9bc088e","line":68,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"ComptrollerErrorReporter.failOpaque(ComptrollerErrorReporter.Error,ComptrollerErrorReporter.FailureInfo,uint256) (Unitroller.sol#68-72) is never used and should"},{"class":"logic","component":"expScale","confidence":"high","description":"Constant Exponential.expScale (Unitroller.sol#387) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"b3403b08f881997a2821fe7acacefb638620cc1ec47f8c98628758301a4265d2","line":387,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant Exponential.expScale (Unitroller.sol#387) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"logic","component":"halfExpScale","confidence":"high","description":"Constant Exponential.halfExpScale (Unitroller.sol#388) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"2539762bc5930343967e5d214d34c7adfa29c42d4d85012fe456bbd374e90a81","line":388,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant Exponential.halfExpScale (Unitroller.sol#388) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"logic","component":"mantissaOne","confidence":"high","description":"Constant Exponential.mantissaOne (Unitroller.sol#389) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"04e7829a4afb31b0d97dcb6d20c62314839493261554c8881319964312c26eef","line":389,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant Exponential.mantissaOne (Unitroller.sol#389) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"other","component":"addExp","confidence":"medium","description":"Exponential.addExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#417-421) is never used and should be removed\n","end_line":421,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"7abd6f9704853c1eb8707fbd076f67a61365b6d7390a6ac16ae1f9ba544fccb0","line":417,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.addExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#417-421) is never used and should be removed"},{"class":"other","component":"divScalar","confidence":"medium","description":"Exponential.divScalar(Exponential.Exp,uint256) (Unitroller.sol#471-478) is never used and should be removed\n","end_line":478,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"0a65a5cafdbdaedc7f0c8c105b6446082091903c76751d72ed05e197aa5abee3","line":471,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.divScalar(Exponential.Exp,uint256) (Unitroller.sol#471-478) is never used and should be removed"},{"class":"other","component":"divScalarByExpTruncate","confidence":"medium","description":"Exponential.divScalarByExpTruncate(uint256,Exponential.Exp) (Unitroller.sol#503-510) is never used and should be removed\n","end_line":510,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"b4a91fbe20b4a72271bbf9c38017e4bc5c1d8c613e68495d4cbf667416437cf6","line":503,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.divScalarByExpTruncate(uint256,Exponential.Exp) (Unitroller.sol#503-510) is never used and should be removed"},{"class":"other","component":"mulExp","confidence":"medium","description":"Exponential.mulExp(uint256,uint256) (Unitroller.sol#540-542) is never used and should be removed\n","end_line":542,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"a6a01b12c4829cf7fb0afc5d0c452c609eaa9be4180044ea2022140dfa301a1e","line":540,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.mulExp(uint256,uint256) (Unitroller.sol#540-542) is never used and should be removed"},{"class":"other","component":"divExp","confidence":"medium","description":"Exponential.divExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#560-562) is never used and should be removed\n","end_line":562,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"071e15ba25c005c104113847503a6430ac47d3a0aa0d8cfcbe1e558b78559c3a","line":560,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.divExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#560-562) is never used and should be removed"},{"class":"other","component":"lessThanExp","confidence":"medium","description":"Exponential.lessThanExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#576-578) is never used and should be removed\n","end_line":578,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"683219524e5c7a2a7aac23b9c050ff6a3322207f8852dd4dbb39903edc9ba79a","line":576,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.lessThanExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#576-578) is never used and should be removed"},{"class":"other","component":"lessThanOrEqualExp","confidence":"medium","description":"Exponential.lessThanOrEqualExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#583-585) is never used and should be removed\n","end_line":585,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"bdae35163675e0d0a73b0e4e4a4f20f0a40bf219ef48bced2174f8fcd3692344","line":583,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.lessThanOrEqualExp(Exponential.Exp,Exponential.Exp) (Unitroller.sol#583-585) is never used and should be removed"},{"class":"other","component":"isZeroExp","confidence":"medium","description":"Exponential.isZeroExp(Exponential.Exp) (Unitroller.sol#590-592) is never used and should be removed\n","end_line":592,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"6a1924ec694962a86f82f11a883da9d5df69d8dbc7793f344c89ef50b3edee0e","line":590,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"Exponential.isZeroExp(Exponential.Exp) (Unitroller.sol#590-592) is never used and should be removed"},{"class":"other","component":"CToken","confidence":"high","description":"CToken (Unitroller.sol#813-2369) does not implement functions:\n\t- CToken.checkTransferIn(address,uint256) (Unitroller.sol#2354)\n\t- CToken.doTransferIn(address,uint256) (Unitroller.sol#2361)\n\t- CToken.doTransferOut(address,uint256) (Unitroller.sol#2368)\n\t- CToken.getCashPrior() (Unitroller.sol#2348)\n","end_line":2369,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"1e181c39276781addd120f44b2c98b061a23db698ba19b2bc42801834f780541","line":813,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unimplemented-functions"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unimplemented-functions","severity":"informational","source":"slither","title":"CToken (Unitroller.sol#813-2369) does not implement functions:"},{"class":"logic","component":"borrowRateMaxMantissa","confidence":"high","description":"Constant CToken.borrowRateMaxMantissa (Unitroller.sol#837) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"7d1bc70d3b99031762ac8be54d8d8814005d3b2c2f90b1bc69e31649ed543377","line":837,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant CToken.borrowRateMaxMantissa (Unitroller.sol#837) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"logic","component":"reserveFactorMaxMantissa","confidence":"high","description":"Constant CToken.reserveFactorMaxMantissa (Unitroller.sol#842) is not in UPPER_CASE_WITH_UNDERSCORES\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"307d9499e6f083f4b9ea1391cba609bc14d597f54a03c69a34738d2f53772e59","line":842,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Constant CToken.reserveFactorMaxMantissa (Unitroller.sol#842) is not in UPPER_CASE_WITH_UNDERSCORES"},{"class":"other","component":"Mint","confidence":"high","description":"Event CToken.Mint(address,uint256,uint256) (Unitroller.sol#935) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"d8a7c4d52fcb3792d8d0efeae67982a2c49a7c4e4626eada5e59c9991480eeb4","line":935,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CToken.Mint(address,uint256,uint256) (Unitroller.sol#935) has address parameters but no indexed parameters"},{"class":"other","component":"Redeem","confidence":"high","description":"Event CToken.Redeem(address,uint256,uint256) (Unitroller.sol#940) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"254ec9556784666d9b4b9fd2a37d96f21f18515d1ea789a320422f1474442c26","line":940,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CToken.Redeem(address,uint256,uint256) (Unitroller.sol#940) has address parameters but no indexed parameters"},{"class":"other","component":"Borrow","confidence":"high","description":"Event CToken.Borrow(address,uint256,uint256,uint256) (Unitroller.sol#945) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"7281485d7211c6ddb512f6e96e6dd4b9517f217743dbb58da60827ceb2738c4c","line":945,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CToken.Borrow(address,uint256,uint256,uint256) (Unitroller.sol#945) has address parameters but no indexed parameters"},{"class":"other","component":"RepayBorrow","confidence":"high","description":"Event CToken.RepayBorrow(address,address,uint256,uint256,uint256) (Unitroller.sol#950) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"8012563e0c12a709c77eea1078daad09b7c36aa78aa9071eea72135c5e3fa7b8","line":950,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CToken.RepayBorrow(address,address,uint256,uint256,uint256) (Unitroller.sol#950) has address parameters but no indexed parameters"},{"class":"other","component":"LiquidateBorrow","confidence":"high","description":"Event CToken.LiquidateBorrow(address,address,uint256,address,uint256) (Unitroller.sol#955) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"ada346fbb31ef503ea652b08e5302b3f1d392ff40cf84f43dc9b757f66e4718c","line":955,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CToken.LiquidateBorrow(address,address,uint256,address,uint256) (Unitroller.sol#955) has address parameters but no indexed parameters"},{"class":"other","component":"NewPendingAdmin","confidence":"high","description":"Event CToken.NewPendingAdmin(address,address) (Unitroller.sol#963) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"08ebf20ef638f4c0c8b2e3fab9d0839811aa43c7d10848c536776442f788bb05","line":963,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CToken.NewPendingAdmin(address,address) (Unitroller.sol#963) has address parameters but no indexed parameters"},{"class":"other","component":"NewAdmin","confidence":"high","description":"Event CToken.NewAdmin(address,address) (Unitroller.sol#968) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"b9d17b43064edd39f87ba35ea0d5e44fbd8865595e49e2e7463524f7d346f983","line":968,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CToken.NewAdmin(address,address) (Unitroller.sol#968) has address parameters but no indexed parameters"},{"class":"other","component":"ReservesReduced","confidence":"high","description":"Event CToken.ReservesReduced(address,uint256,uint256) (Unitroller.sol#988) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"c825121043761abbd4fbf3ec86dbe4c823ac887814faa6e19f5ff0010abb2e1a","line":988,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event CToken.ReservesReduced(address,uint256,uint256) (Unitroller.sol#988) has address parameters but no indexed parameters"},{"class":"other","component":"mintInternal","confidence":"medium","description":"CToken.mintInternal(uint256) (Unitroller.sol#1466-1474) is never used and should be removed\n","end_line":1474,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"845a12be091c2b72cfb0f4541ec70da2df3a872d7ab04e4f4e3a3728d97b9fcc","line":1466,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.mintInternal(uint256) (Unitroller.sol#1466-1474) is never used and should be removed"},{"class":"other","component":"mintFresh","confidence":"medium","description":"CToken.mintFresh(address,uint256) (Unitroller.sol#1492-1569) is never used and should be removed\n","end_line":1569,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"f1432466e09437750aaf373ecbd0640e8b7d45a34198f94b17bf5b85321d0757","line":1492,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.mintFresh(address,uint256) (Unitroller.sol#1492-1569) is never used and should be removed"},{"class":"other","component":"redeemInternal","confidence":"medium","description":"CToken.redeemInternal(uint256) (Unitroller.sol#1577-1585) is never used and should be removed\n","end_line":1585,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"ae687403fcfac0e4e24964261d52d346249f030b0f6e907a6ff6ab40413b1e46","line":1577,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.redeemInternal(uint256) (Unitroller.sol#1577-1585) is never used and should be removed"},{"class":"other","component":"redeemUnderlyingInternal","confidence":"medium","description":"CToken.redeemUnderlyingInternal(uint256) (Unitroller.sol#1593-1601) is never used and should be removed\n","end_line":1601,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"e9e84675bc0bc06168afb270521e62e3f2ddaf717d008a9d1c9d5d4afc10c676","line":1593,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.redeemUnderlyingInternal(uint256) (Unitroller.sol#1593-1601) is never used and should be removed"},{"class":"other","component":"redeemFresh","confidence":"medium","description":"CToken.redeemFresh(address,uint256,uint256) (Unitroller.sol#1621-1717) is never used and should be removed\n","end_line":1717,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"53615e21fe2590c1336d4a7b468963db41fea9bac535b0dc68bc11f133fee371","line":1621,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.redeemFresh(address,uint256,uint256) (Unitroller.sol#1621-1717) is never used and should be removed"},{"class":"other","component":"borrowInternal","confidence":"medium","description":"CToken.borrowInternal(uint256) (Unitroller.sol#1724-1732) is never used and should be removed\n","end_line":1732,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"42f150141f7222565cb3222b4d5bbde4f050145b24df55b33a63cf08dcb39a42","line":1724,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.borrowInternal(uint256) (Unitroller.sol#1724-1732) is never used and should be removed"},{"class":"other","component":"borrowFresh","confidence":"medium","description":"CToken.borrowFresh(address,uint256) (Unitroller.sol#1747-1812) is never used and should be removed\n","end_line":1812,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"9412f8e1de7c71828e7722e2f9ae7814de1cd946d492c3b313442f8d5da7aec1","line":1747,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.borrowFresh(address,uint256) (Unitroller.sol#1747-1812) is never used and should be removed"},{"class":"other","component":"repayBorrowInternal","confidence":"medium","description":"CToken.repayBorrowInternal(uint256) (Unitroller.sol#1819-1827) is never used and should be removed\n","end_line":1827,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"d042eeb99c8858b723c707653fbcde3b121c3fffeb2143fb931a29a128177006","line":1819,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.repayBorrowInternal(uint256) (Unitroller.sol#1819-1827) is never used and should be removed"},{"class":"other","component":"repayBorrowBehalfInternal","confidence":"medium","description":"CToken.repayBorrowBehalfInternal(address,uint256) (Unitroller.sol#1835-1843) is never used and should be removed\n","end_line":1843,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"e589b2e828a61712e2aa653b475adbe92e1f0b74e10145d2ec364d59345b0dc1","line":1835,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.repayBorrowBehalfInternal(address,uint256) (Unitroller.sol#1835-1843) is never used and should be removed"},{"class":"other","component":"repayBorrowFresh","confidence":"medium","description":"CToken.repayBorrowFresh(address,address,uint256) (Unitroller.sol#1862-1939) is never used and should be removed\n","end_line":1939,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"1062b16e478f96158a7c6b4b6b7d35a1a85e7adcbcf1e209b65bd8dcc215d345","line":1862,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.repayBorrowFresh(address,address,uint256) (Unitroller.sol#1862-1939) is never used and should be removed"},{"class":"other","component":"liquidateBorrowInternal","confidence":"medium","description":"CToken.liquidateBorrowInternal(address,uint256,CToken) (Unitroller.sol#1949-1964) is never used and should be removed\n","end_line":1964,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"3a133895f91c3ceb0e59663fd798de543aea26f5d9f0beece8ca4ba68d294db1","line":1949,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.liquidateBorrowInternal(address,uint256,CToken) (Unitroller.sol#1949-1964) is never used and should be removed"},{"class":"other","component":"liquidateBorrowFresh","confidence":"medium","description":"CToken.liquidateBorrowFresh(address,address,uint256,CToken) (Unitroller.sol#1975-2035) is never used and should be removed\n","end_line":2035,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"b5e688735fed3190250d667098e6f5ac4cdd7465942a7b71b9cbb37f988ebc5c","line":1975,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#dead-code"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:dead-code","severity":"informational","source":"slither","title":"CToken.liquidateBorrowFresh(address,address,uint256,CToken) (Unitroller.sol#1975-2035) is never used and should be removed"},{"class":"logic","component":"_setPendingAdmin","confidence":"high","description":"Function CToken._setPendingAdmin(address) (Unitroller.sol#2105-2121) is not in mixedCase\n","end_line":2121,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"5096b3b74377760ebb497bc055b17f979c25eab062ff31b1e9130a5f4cf351df","line":2105,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._setPendingAdmin(address) (Unitroller.sol#2105-2121) is not in mixedCase"},{"class":"logic","component":"_acceptAdmin","confidence":"high","description":"Function CToken._acceptAdmin() (Unitroller.sol#2128-2148) is not in mixedCase\n","end_line":2148,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"623f6cb782d7028f1fe6ad4146392f821edf9b13c161bfbae159395987427f0e","line":2128,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._acceptAdmin() (Unitroller.sol#2128-2148) is not in mixedCase"},{"class":"logic","component":"_setComptroller","confidence":"high","description":"Function CToken._setComptroller(ComptrollerInterface) (Unitroller.sol#2155-2172) is not in mixedCase\n","end_line":2172,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"d3dff6ebf7dd8f61d9859d9595f8364437ae62901d33de3426769e49d8e9f484","line":2155,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._setComptroller(ComptrollerInterface) (Unitroller.sol#2155-2172) is not in mixedCase"},{"class":"logic","component":"_setReserveFactor","confidence":"high","description":"Function CToken._setReserveFactor(uint256) (Unitroller.sol#2179-2187) is not in mixedCase\n","end_line":2187,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"0785c6bf414a6e55544c41fbfc994777d8d1bd91f02f7d0f505862e7aa11f102","line":2179,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._setReserveFactor(uint256) (Unitroller.sol#2179-2187) is not in mixedCase"},{"class":"logic","component":"_reduceReserves","confidence":"high","description":"Function CToken._reduceReserves(uint256) (Unitroller.sol#2224-2232) is not in mixedCase\n","end_line":2232,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"b0bf06a368c3d3f68418a019dce558f5371d72c38969c45bbbec3b8c7ff3c6fe","line":2224,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._reduceReserves(uint256) (Unitroller.sol#2224-2232) is not in mixedCase"},{"class":"logic","component":"_setInterestRateModel","confidence":"high","description":"Function CToken._setInterestRateModel(InterestRateModel) (Unitroller.sol#2294-2302) is not in mixedCase\n","end_line":2302,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"91e0042b74e55e03d744f85a1e6093d117cf742246a0674a0d79380f9c4ece65","line":2294,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function CToken._setInterestRateModel(InterestRateModel) (Unitroller.sol#2294-2302) is not in mixedCase"},{"class":"other","component":"NewPendingImplementation","confidence":"high","description":"Event Unitroller.NewPendingImplementation(address,address) (Unitroller.sol#2464) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"fdb321b926ad453a7ae30d680dd7aec7c8cf5ef9330ecc66065e1071ef5a8623","line":2464,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event Unitroller.NewPendingImplementation(address,address) (Unitroller.sol#2464) has address parameters but no indexed parameters"},{"class":"other","component":"NewImplementation","confidence":"high","description":"Event Unitroller.NewImplementation(address,address) (Unitroller.sol#2469) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"7cdfa491d566d83ce920545783bd60c42c0094528efb3e20b1490e14cc6bbec3","line":2469,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event Unitroller.NewImplementation(address,address) (Unitroller.sol#2469) has address parameters but no indexed parameters"},{"class":"other","component":"NewPendingAdmin","confidence":"high","description":"Event Unitroller.NewPendingAdmin(address,address) (Unitroller.sol#2474) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"287a6787e2c681ec22fc6e02a73e17e10320133e14e3e3c4c51a5b315cea698f","line":2474,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event Unitroller.NewPendingAdmin(address,address) (Unitroller.sol#2474) has address parameters but no indexed parameters"},{"class":"other","component":"NewAdmin","confidence":"high","description":"Event Unitroller.NewAdmin(address,address) (Unitroller.sol#2479) has address parameters but no indexed parameters\n","exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"4553a5d0f45a7d7f6e8090909bf3bcbb1928e2574004fe50e8b95b79109b7a00","line":2479,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#unindexed-event-address"],"remediation":"Review the detector output against the source manually; if exploitable, design a fix and add a regression test before deploying.","rule_id":"slither:unindexed-event-address","severity":"informational","source":"slither","title":"Event Unitroller.NewAdmin(address,address) (Unitroller.sol#2479) has address parameters but no indexed parameters"},{"class":"logic","component":"_setPendingImplementation","confidence":"high","description":"Function Unitroller._setPendingImplementation(address) (Unitroller.sol#2487-2500) is not in mixedCase\n","end_line":2500,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"89e5fc46a0c0c53e3b48d5af3fd7fa6cab9f6f9083f179c953af0fcfae67f0ae","line":2487,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Unitroller._setPendingImplementation(address) (Unitroller.sol#2487-2500) is not in mixedCase"},{"class":"logic","component":"_acceptImplementation","confidence":"high","description":"Function Unitroller._acceptImplementation() (Unitroller.sol#2507-2525) is not in mixedCase\n","end_line":2525,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"6023554651adfc37b03a2fde8ed30fd41e6df4d6233cc2abec6f1e2571f1a028","line":2507,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Unitroller._acceptImplementation() (Unitroller.sol#2507-2525) is not in mixedCase"},{"class":"logic","component":"_setPendingAdmin","confidence":"high","description":"Function Unitroller._setPendingAdmin(address) (Unitroller.sol#2536-2552) is not in mixedCase\n","end_line":2552,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"2833986fc3c69750f61e0fd196bb80a3fcc2246c5b0f3e4b564e0566bce83958","line":2536,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Unitroller._setPendingAdmin(address) (Unitroller.sol#2536-2552) is not in mixedCase"},{"class":"logic","component":"_acceptAdmin","confidence":"high","description":"Function Unitroller._acceptAdmin() (Unitroller.sol#2559-2579) is not in mixedCase\n","end_line":2579,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"20c5cd255d8d94ce1ed86238f63c032e2c9472719035db6f9efd4e4a745803c5","line":2559,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#naming-convention"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:naming-convention","severity":"informational","source":"slither","title":"Function Unitroller._acceptAdmin() (Unitroller.sol#2559-2579) is not in mixedCase"},{"class":"logic","component":"fallback","confidence":"high","description":"Unitroller.fallback() (Unitroller.sol#2586-2599) uses assembly\n\t- INLINE ASM (Unitroller.sol#2591-2598)\n","end_line":2599,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"1bfd4a14d523ddc722c3eb54bee1d439e898e963a7a53c6335a2badd61100a4b","line":2586,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#assembly"],"remediation":"Re-derive the business rule by hand, write a property-based test that fails on the current path, and only then fix the implementation.","rule_id":"slither:assembly","severity":"informational","source":"slither","title":"Unitroller.fallback() (Unitroller.sol#2586-2599) uses assembly"},{"class":"unchecked-call","component":"fallback","confidence":"high","description":"Low level call in Unitroller.fallback() (Unitroller.sol#2586-2599):\n\t- (success,None) = comptrollerImplementation.delegatecall(msg.data) (Unitroller.sol#2588)\n","end_line":2599,"exploitability":"low","exploitability_note":"Informational signal; not directly exploitable without additional context.","file":"Unitroller.sol","id":"05abde65adb655d279f9fe8741eb6b9792ac660434c0e27d71df43e6de68bdf1","line":2586,"references":["https://github.com/crytic/slither/wiki/Detector-Documentation#low-level-calls"],"remediation":"Check the boolean return of low-level call/delegatecall/send and revert on failure with a descriptive reason string.","rule_id":"slither:low-level-calls","severity":"informational","source":"slither","title":"Low level call in Unitroller.fallback() (Unitroller.sol#2586-2599):"}],"limitations":["VegaSec runs static analysis only. Findings can include false positives, miss patterns the configured detectors do not cover, and never replace manual auditor judgement.","Scan ran slither and semgrep against a single sandboxed copy of the source. Multi-file dependency analysis beyond what slither resolves automatically is out of scope.","Some detectors emitted warnings (see `warnings`); their output was still ingested but should be read with extra care.","This report is not a certification, audit attestation, or financial advice."],"warnings":["Unmapped detector slither:erc20-interface — classified as 'other'","Unmapped detector slither:dead-code — classified as 'other'","Unmapped detector slither:unimplemented-functions — classified as 'other'","Unmapped detector slither:unindexed-event-address — classified as 'other'"]},"canonical_version":"vss-canonical-1","coverage_status":"complete","final_score":0,"findings_count":84,"generated_at":"2026-10-04T00:37:11.570Z","id":"VSS-20261004-ZTOB8VVZ","severity_counts":{"critical":0,"high":1,"informational":52,"low":8,"medium":23},"source_filename":"Unitroller.sol","source_hash":"cf55aadc586b6a253cb52616954f1da5f142e8b7d87bea486d3a57c24b56b805","surface":"solidity","warnings_count":4}